Jump to content
SAU Community

19 Inch Forged Rays

Grapes
 Share

Recommended Posts

Guest

Guest

Posted
Posted

E.O.I

I have a set ! Slight curb rash on all 4 wheels, not by me (it was like that when I bought the car).

I added Nismo stickers on them :rolleyes: , comes with 245/35/19 Federal 595 Evo semi-slick tires, have about 50-60% thread left on all 4 tires.

$1,600 O.N.O, located in Perth.

Great photo by the way! Always wanted to know what these looked like on a V36! :D

sonicii Veteran

sonicii

Posted
Posted

+1... I find this very hard to believe...

...and I want to belieb.

Yeah.. I haven't actually seen a set of 19in rays for that on their own, but I have seen a good set with decent near new tyres for $1000, so if you subtract the cost of the tyres, you could claim the rims come in at about the $300 figure??

_thom_ Collaborator

_thom_

Posted
Posted

I've seen 2 sets sell for $600 (one on eBay, another on FB) and another sell for $300. These are the 19" Rays OEM wheels (8" & 8.5") with tyres.

OEM 18" wheels only sell for $300-500. I've seen a set sell for $800, but they had 5km on them. They were practically untouched.

17" OEM wheels don't sell. You'd struggle to give them away.

Tyres on used rims don't add any value. They are usually a bonus that attract someone to the sale (similar to mods on a car).

A lot of people will claim these are rare & try to list for a crazy price. It's no surprise they are still holding onto them a year later. A lot of people put a high price ($1.5k) on 350z brembos or 370z akebonos (because of the brand). These are still OEM though and only sell for $800 from a wreckers. Sure they have the brand name, but they are still mass produced for these vehicles.

Jeremy1607 Collaborator

Jeremy1607

Posted
Posted

I've seen 2 sets sell for $600 (one on eBay, another on FB) and another sell for $300. These are the 19" Rays OEM wheels (8" & 8.5") with tyres.

OEM 18" wheels only sell for $300-500. I've seen a set sell for $800, but they had 5km on them. They were practically untouched.

17" OEM wheels don't sell. You'd struggle to give them away.

Tyres on used rims don't add any value. They are usually a bonus that attract someone to the sale (similar to mods on a car).

A lot of people will claim these are rare & try to list for a crazy price. It's no surprise they are still holding onto them a year later. A lot of people put a high price ($1.5k) on 350z brembos or 370z akebonos (because of the brand). These are still OEM though and only sell for $800 from a wreckers. Sure they have the brand name, but they are still mass produced for these vehicles.

So how about this ? I guess no one would buy them then ? Lol

Nissan Skyline V35 Coupe 18 Inch Wheels With Tyres

2 tyres are not roadworthy , 2 tyres have 70% even tread and will pass roadworthy

Advanced Jap Auto Imports

Factory 4/31-39 North View drive Sunshine West Vic 3020 Corner Of West Circuit & North View Drive

(03) 9314-7776

Contact Details Only To Be Used To Seek Information Regarding Ebay Listing

0421 025 216

post-79744-0-03931000-1415708045_thumb.jpg

sonicii Veteran

sonicii

Posted
Posted

So how about this ? I guess no one would buy them then ? Lol

No one with any common sense.. $1600 for a set of OEM cast 18in rims.. ouch.. I guess they are hoping for someone with more money than brains..

_thom_ Collaborator

_thom_

Posted
Posted

Those rims would be lucky to sell for $300-400. Replacing the 2 unroadworthy tyres would make them more hassle than they are worth.

Plenty of people list things for unrealistic prices (especially retailers) - it doesn't mean that the market rate is even close to the amount. If it was, my V35 would be worth $26K after converting back to stock. :)

camr33 Collaborator

camr33

Posted
Posted (edited)

I wouldn't say OEM rims are worthless, the there are plenty of R33's with 34 rims, or 34's with V35/305z rims etc. I actually prefer the OEM look, I would only change my V35 rims to a bigger 18" or 19" style (or R35 GTR). Cant stand it when I see a nice car ruined with chromies, Bob Jane racing wheels or any other nonsense.

But 1600 is a bit too much, considering I saw a set of R35 GTR rims with Tyres for $2k not too long ago.

Edited by camr33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Manur33
      Rb25det coil loom wire identification

      By Manur33 · Posted

      Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • davemoto63
      Stagea choice's which model??

      By davemoto63 · Posted

      Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • davemoto63
      Noobie Stagea owner..

      By davemoto63 · Posted

      Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...