Jump to content
SAU Community

Recommended Posts

My 32 gtr is up for sale made 560hp on 22psi on pump 98. Was rebuilt less than 10k ago by cs mmotors. Running a gt4094r eboost street. Full adjustable Coilovers. Os giken twin plate cluth. Chasing 23k ono. Located in Townsville. I have probably missed a few things so if your interested send me a pm or msg on 0423041840 cheers

post-115677-0-05320600-1417668680_thumb.jpg

post-115677-0-63192600-1417668703_thumb.jpg

post-115677-0-69035200-1417668722_thumb.jpg

post-115677-0-19372800-1417668749_thumb.jpg

post-115677-0-42317500-1417668764_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/451385-wts-my-32-gtr-560hp-on-22psi/
Share on other sites

  • 3 weeks later...
  • 4 weeks later...
  • 2 weeks later...
  • 4 weeks later...
  • 3 weeks later...

I hope this is a bit better.

I bought the car early in 2013 with 98000ks. As it stands now it's at 107000ks. It was rebuilt 3 weeks after I got it by cs motors here in Townsville.

The motor.

The turbo is gt4094r.

je pistons 0.020 over size.

scat rods. 2000 series rod bolts.

Std crank with collar and oil gallery mods.

Tomie oil pump with external adjustable regulator.

ARP head studs.

Modified oil and baffled oil sump.

External and drains and restrictions fitted to the head.

Supertech duel valve springs.

adjustable hks cam gears.

Camtech camshafts 272s.

Microtech LTC15C ECU.

Microtech x6 ignition.

Microtech LTC dash display with gps.

Id1000 injectors.

Sard fuel rails.

Magnafuel fuel pressure regulator.

Twin 044 fuel pumps and 2.5L surge tank.

6 boost manifold.

Other points on the car.

Gearbox is Reconditioned from previous owner.

Os giken twin plate clutch.

Brand new Pwr radiator.

Eboost street boost controler.

50mm blow off vale can't remember the name of it.

Brand new battery and alternator.

The interior.

It has an alpine cd player that I never use.

It has aftermarket speakers.

No bubbles or cracks in the dash.

Seats are in good condition no rips or tares.

The steering wheel and the drivers side apiller are a bit ratty.

The outside.

Still have the standard rims as that's my style stock sleeper.

adent/scratch on the bonnet.

Some scuff marks on the front bar also.

The paint is on good condition otherwise.

I have run the car once at palmyra drags in Mackay it run an 11.6 @ 126 mph.

I'm not sure how to add more photos other wise I would. Il add more when I remember it cheers joey for the help.

  • Like 1

Great looking GTR, love the single setup! And in gun grey. Almost exactly the same as my old one only far neater.

Good vid on CS Motors FB page too.

What is its drivability on the street like with the GT40, when does it come on boost and how does it pull?

And no E85 tune?

Cheers Ben. It is laggy but I haven't really been in any other gtr to compare it too. I don't find it that hard to drive As I only drive it to and from work. I think full boost is about 4500rpm but it's only limited to 7000rpm at the moment with plenty left in it. In 2wd pretty much useless with stock rubber. Pulls hard in 4wd tho. There is no e85 on pump here that's the only reason why I haven't done it...

Cheers guys. It also has pedders adjustable coiloves. Walbro in tank lift pump I think its a 250lph but will find out. Had a service last month also. Will be getting new DBA t3 rotors and qfm pads in the next few weeks.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Kinda glad I never got to this ..    https://www.facebook.com/groups/1483859159195077
    • @GTSBoy This method was able to get readings of -10 to -2, so it looks like its monitoring.  Now I need to figure out why the vacuum on the line provided isn't alternating with manifold pressure.  I went with 2 lines that an RB25 tuner recommended but I'll get a longer hose and try directly off the back of the manifold.  He may have been used to OEM intake setups while I have a DBW setup that removed the MAF and IACV.  
    • I work at a car detailing and tinting shop called Quark which gets all manner of German cars in usually (mainly due to a contract with Mercedes Benz Kita Osaka, BMW Nishinomiya and others) but every once in a while something special comes in, like a fully restored 1972 HS30 Nissan Fairlady 240ZG... The shop owner had immediately started applying film to the windows as soon as it was in the shop so the interior was completely covered in towels and plastic sheets. But I could get a few photos of the engine bay which was restored like new. Such an amazing car to see in pristine condition in Japan these days.  
    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
×
×
  • Create New...