Jump to content
SAU Community

Recommended Posts

Can any one tell me which other models of the "drift family" nissans will interchange with the rear subframe in an R33?

Good ol' Nissan is a lot like lego with the way parts can be chopped and changed. ButI'ma bit new to the finer points when it comes to thingslike that.

Your advice is greatly appreciated.

Sweetbix.

So I can slam an R32 non hicas rear end under an R33?

I scored a non nicas from a povo pack r32 a while ago, I was saving it for an A31 I scored for free. But I think the 33 coupe will be a better fit with what i'm wanting to do with the car.

Someone correct me if I'm wrong but I was under the impression that r33 rear subframe is better geometry wise? Has a bit more rear squat than 32 so it gets better grip

And that you need offset bushes to mount 32/s13 rear subframe on r33/34/s14/15 and vice versa?

there is a difference in the angle of the LCA mounts between 32 vs 33/34 but they are still interchangeable.

some of the subframes have different mounting distance on the car, there are offset subframe bushes to deal with this issue; but I don't know which ones have which.

some models have hicas, some have none (standard control arm with bushes instead)

2wd have different spacing to 4wd from the floor to the subframe but again they are interchangeable

some have wider track than others, eg w34 is narrower than r33

but overall they are surprisingly similar. lots of other rwd nissans from the same era too like GF50 cima.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...