Jump to content
SAU Community

Recommended Posts

Hello

I have a r32 GTS-T

Currently I have the intake, full turbo back exhaust, intercooler and boost controller on the car.

I am about to upgrade to a rb25 turbo, a tuned Tomei computer that is for my set up with a GTR fuel pump, and a 25 turbo, I think it is a boost up tune,. Not sure how much of a boost up tune it is.

Will my stock clutch handle this?

Someone gave me a ACT 6 puck un-spring clutch kit. http://www.rawbrokerage.com/act-6-puck-un-sprung-xt-clutch-kit-rb20det-rb25det-630ft-lbs/

Is this overkill for my set up? Will this be uncomfortable to drive on the street?

Edited by yoshiii335

Before you even worry about a clutch go and get a nistune instead of that tomei whatever.

You can't just go and put some random ecu in and expect the tune to be spot on for your motor.

Nistune is expensive here in Japan. Only two places does it. The place wants over 1000 dollars to tune it. From what I have read and been told on this forum, it should only be about 300-500 dollars for a tune.

The computer is tuned for myset up for a r32 gtst-t.

Since I have this clutch anyway, is it good to use or is it for high horse power and will driving on the street be uncomfortable?

Nistune is expensive here in Japan. Only two places does it. The place wants over 1000 dollars to tune it. From what I have read and been told on this forum, it should only be about 300-500 dollars for a tune.

The computer is tuned for myset up for a r32 gtst-t.

Since I have this clutch anyway, is it good to use or is it for high horse power and will driving on the street be uncomfortable?

"The computer is tuned for myset up for a r32 gtst-t."

No it's not. It's tuned for some other setup. You have no idea whether your engine will take the same amount of timing and you have no idea if your fuel system flows the same way as the car it was "tuned" on. Buy your self a TUNABLE ECU and give up on this cheap arse approach you seem to have.

"Since I have this clutch anyway, is it good to use or is it for high horse power and will driving on the street be uncomfortable?"

That clutch will be a miserable motherf**ker to live with. Buy a sprung organic full face HD clutch from some reputable vendor.

"The computer is tuned for myset up for a r32 gtst-t."

No it's not. It's tuned for some other setup. You have no idea whether your engine will take the same amount of timing and you have no idea if your fuel system flows the same way as the car it was "tuned" on. Buy your self a TUNABLE ECU and give up on this cheap arse approach you seem to have.

"Since I have this clutch anyway, is it good to use or is it for high horse power and will driving on the street be uncomfortable?"

That clutch will be a miserable motherf**ker to live with. Buy a sprung organic full face HD clutch from some reputable vendor.

Its not a cheap approach, I came into these items. I was actually searching for a affordable tuning computer or maybe going to MINES.

I will probably stick with a Nismo Clutch, that was the plan

Its not a cheap approach, I came into these items. I was actually searching for a affordable tuning computer or maybe going to MINES.

MINES = exploded engine. Do not do it. Expect to pay $2k for a decent aftermarket ECU and up to $1k to get it tuned. Expect these numbers and come to accept them. They are reality. That quote that you have for >$1k to tune a Nistune in Japan......Does that include supply and install of the board? If so, then the price is right.

MINES = exploded engine. Do not do it. Expect to pay $2k for a decent aftermarket ECU and up to $1k to get it tuned. Expect these numbers and come to accept them. They are reality. That quote that you have for >$1k to tune a Nistune in Japan......Does that include supply and install of the board? If so, then the price is right.

No, that is just the price of the tune.

MINES = exploded engine. Do not do it. Expect to pay $2k for a decent aftermarket ECU and up to $1k to get it tuned. Expect these numbers and come to accept them. They are reality. That quote that you have for >$1k to tune a Nistune in Japan......Does that include supply and install of the board? If so, then the price is right.

Why the bad rep with MINES? Ive never heard anything bad about them except their high prices here in Japan.

Are you kidding? They have a MASSIVE reputation for having too much ignition timing. That is probably more of a problem for Aussies, because 100 octane fuel is available in Japan and the Mines ECUs are probably set up for that, and we only had 95 for a log time, and only 98 now. But the real big problem is that people think that you can just grab a random ECU and stick it on your engine, with no idea of the relative merits of the ignition, fuelling, turbo size and boost threshold etc etc and just believe that it will work. What happens if the Mines ECU winds in too much timing in a certain area of the map because it was set up for a bigger turbo and yours is making boost there? Pinging? Detonation? What if your fuel pump is not as good as was expected when the ECU was mapped? Or what if yours is much better and maintains heaps more pressure at high load and rpm? What if your injectors are dirty, or have been swapped for something else and you didn't know? ETC ETC ETC.

Are you kidding? They have a MASSIVE reputation for having too much ignition timing.

<snip>

OP, are you talking about going to the Mines shop and getting them to burn a custom EEPROM for your car? (This is OK)

GTSBoy is talking about getting a random ECU with a Mines sticker and slapping it in your car. (This is not OK)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...