Jump to content
SAU Community

Recommended Posts

I'm looking to sell my R32 GTR as with my family and work I am not using it as much as I would like.

The car is a 1989 and is supporting the original paintwork.

I have owned a couple of this model and this car is in great condition inside out and underneath.

I spent considerable time looking for a genuine car before buying this one.

Modifications are fairly extensive and its an all round package.

Full JUN built motor, forged pistons, I beam rods,

JUN cams 272 10.5mm,

JUN oil pump and crank nose extension,

Tomei metal Headgasket, metal exhaust, metal intake gaskets and full set,

ARP mains and head studs

Greddy weld on sump extensioon/baffles etc.

Greddy inter cooler,

Greddy oil cooler/thermostat/remote filter mount,

Greddy radiator,

Greddy hard pipe kit

Trust T517z 10cm turbos

Tomei Expreme dump pipes,

Trust Drag evolution exhaust with removable silencer, 3.75"

Custom oil catch can/radiator overflow bottle

Big fuel setup, custom surge tank twin Bosch 044 pumps, bosch 2000cc injectors, Tomei fuel pressure reg,

Haltech platinum pro ECU,

Genuine AC Delco LS2 Truck coil packs,

OS Giken twin plate clutch,

Bride seats,

Greddy coil overs

N1 headlights

Nismo 320kph dash cluster

Defi gauges, boost, oil pressure, oil temp, water temp, Defi controller with playback and memory,

AME tm02 18x10 +15 wheels and 265 semi tyres, same wheels used on the Advan time atack car

All parts are genuine, no cheap gear used anywhere.

Good points

The interior is very tidy, no dash bubble, carpets are clean and not very worn

Original paint, so you what you see is the true indication of the cars health.

Still uses the original front and rear disk rotors indicating the car has not had much use/kms

Brakes overhauled 200km ago, machined rotors, new pads/fluid

Replaced rear cradle bushed and diff bushes with nolathane lately

Bad points

Some paint scratches on the front bumper and paint worn off the lower sections of the pods/skirts.

small crack in the front lip, only minor.

10c size rust/corrosin bubble at the bottom of one front guard.

steering wheel is not as neat as the rest of the interior

Call for further details, genuine 10 second street car. Please only call if genuinely interested.

May trade 4 door early model car, hq, vc valiant, xr falcon, possibly even a caravan for my family.

Car is located in North Tasmania, not far from the spirit of Tasmania for Mainland buyers.

price is $25K

PH 0408275902

IMG_1662.jpg

Edited by blue_vl_t
Link to comment
https://www.sau.com.au/forums/topic/452126-r32-gtr-clean-and-well-modified/
Share on other sites

  • 4 weeks later...
  • 5 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
×
×
  • Create New...