Jump to content
SAU Community

Recommended Posts

Hey All,

Time to sell off my R34 parts no longer needed; items are brand new unless specified otherwise + Postage unless local pickup from South Brisbane!

1. $185.00 - Fuel Lab #53501-1 EFI Regulator with mini gauge 6AN fitting - brand new still in packaging/warranty

2. $400.00 - One piece custom tail shaft to suit R34 GTT - Was balanced and only ever trial fitted to the car, would suit higher HP applications!

3. $200.00 - Smoked LED R34 GTT Coupe rear tail lights - Brand new still in packaging

4. $150.00 - R34 Front castor arms with offset bushings as new - arms were sandblasted/painted/refurbished

5. $90.00 - R34 Front uprated steering rack tie rods - SRI Just Jap items Brand new still in packaging

6. $150.00 - R34 Front lower ball joints taller than standard for lowered vehicles - Brand new Just Jap items

7. $75.00 - R34 2 x Whiteline rear subframe bushings brand new (these retail for $220 for 4)

8. $45.00 - R34 2 x Rear red diff end bushings brand new

9. $50.00 - R34 Whiteline rear subframe pineapples almost new were in the car for less than 1,000km

10. $80.00 - R34 Turbo SS Dump Pipe - Just Jap item brand new with hardware

11. $150.00 - R34 TURBO SEDAN Rear diff center removed at 65,000km was silent/smooth before it was upgraded to a 1.5way

12. $65.00 - Greddy FATT Turbo timer As-New - alarm installer wanted it out so no need for it now

13. $50.00 - ECU Talk cable

Also have a complete R32 rear cradle setup complete without diff $150 pickup

post-65197-0-91706100-1420189412_thumb.jpg

post-65197-0-91815300-1420189454_thumb.jpg

post-65197-0-60172900-1420189470_thumb.jpg

post-65197-0-72175200-1420189485_thumb.jpg

post-65197-0-09679600-1420189503_thumb.jpg

post-65197-0-91233200-1420189518_thumb.jpg

post-65197-0-22132600-1420189532_thumb.jpg

post-65197-0-08280100-1420189556_thumb.jpg

post-65197-0-77846400-1420189596_thumb.jpg

post-65197-0-01872800-1420189615_thumb.jpg

post-65197-0-91301300-1420189635_thumb.jpg

You can also call/text enquiries to 0435029573

Edited by lowbro

Madman, all my engine parts are gone now, but this R33 one should work as the Neo only had the head changed from the standard RB25DET bottom end, everything else remained the same!

http://www.ebay.com.au/itm/R33-Nissan-Skyline-RB25-Oil-cooler-/181554155881?pt=AU_Car_Parts_Accessories&hash=item2a45789169

  • 1 month later...

Update - R34 parts no longer needed; items are brand new unless specified otherwise + Postage, local pickup from South Brisbane!



1. $200.00 - Fuel Lab #53501-1 EFI Regulator with mini gauge 6AN fitting - brand new still in packaging/warranty!!


2. $400.00 - One piece custom tail shaft to suit R34 GTT - Was balanced and only ever trial fitted to the car! Make me an offer on this!!


3. $200.00 - Smoked LED R34 GTT Coupe rear tail lights - Brand new still in packaging - SOLD!


4. $150.00 - R34 Front castor arms with offset bushings as new - arms were sandblasted/painted/refurbished - Make an offer!


5. $90.00 - R34 Front uprated steering rack tie rods - SRI Just Jap items Brand new still in packaging!


6. $150.00 - R34 Front lower ball joints taller than standard for lowered vehicles - Brand new Just Jap items - RRP $200


7. $75.00 - R34 2 x Whiteline rear subframe bushings brand new (these retail for $220 for 4)


8. $45.00 - R34 2 x Rear red diff end bushings brand new


9. $50.00 - R34 Whiteline rear subframe pineapples almost new were in the car for less than 1,000km as replaced the cradle bushings!


10. $80.00 - R34 Turbo SS Dump Pipe - Just Jap item brand new with hardware!


11. $150.00 - R34 TURBO SEDAN Rear diff center removed at 65,000km was silent/smooth before it was upgraded to a 1.5way


12. $65.00 - Greddy FATT Turbo timer As-New - alarm installer wanted it out so no need for it now


13. $50.00 - ECU Talk cable



Also have a complete R32 rear cradle setup complete without diff $150 pickup


  • 2 weeks later...
  • 2 months later...

Update - R34 parts no longer needed; items are brand new unless specified otherwise + Postage, local pickup from South Brisbane!



1. $185 - Fuel Lab #53501-1 EFI Regulator with mini gauge 6AN fitting - brand new still in packaging/warranty!!


2. $350.00 - One piece custom tail shaft to suit R34 GTT manual - was balanced and only ever trial fitted to the car!


3. $200.00 - Smoked LED R34 GTT Coupe rear tail lights - Brand new still in packaging - SOLD!


4. $100.00 - R34 Front castor arms with offset bushings as new - arms were sandblasted/painted/refurbished


5. $75.00 - R34 Front uprated steering rack tie rods - SRI Just Jap items Brand new still in packaging!


6. $125.00 - R34 Front lower ball joints taller than standard for lowered vehicles - Brand new Just Jap items - RRP $200


7. $50.00 - R34 2 x Whiteline rear subframe bushings brand new (these retail for $220 for 4)


8. $35.00 - R34 2 x Rear red diff end bushings brand new


9. $40.00 - R34 Whiteline rear subframe pineapples almost new were in the car for less than 1,000km as replaced the cradle bushings!


10. $80.00 - R34 Turbo SS Dump Pipe - Just Jap item brand new with hardware!


11. $125.00 - R34 TURBO SEDAN Rear diff center removed at 65,000km was silent/smooth before it was upgraded to a 1.5way


12. $55.00 - Greddy FATT Turbo timer As-New.



Also have a complete R32 rear cradle setup complete without diff $100 pickup from Sth Brisbane!



All items are to be listed on gumtree from today!


Edited by lowbro
  • 9 months later...

Update - R34 parts no longer needed; items are brand new unless specified otherwise + Postage, local pickup from South Brisbane 4122!

1. $185 - Fuel Lab #53501-1 EFI Regulator with mini gauge 6AN fitting - brand new still in packaging/warranty!! - SOLD!

2. $200.00 - One piece custom tail shaft to suit R34 GTT manual - was balanced and only ever trial fitted to the car!

3. $200.00 - Smoked LED R34 GTT Coupe rear tail lights - Brand new still in packaging - SOLD!

4. $90.00 - R34 Front castor arms with offset bushings as new - arms were sandblasted/painted/refurbished

5. $65.00 - R34 Front uprated steering rack tie rods - SRI Just Jap items Brand new still in packaging!

6. $100.00 - R34 Front lower ball joints taller than standard for lowered vehicles - Brand new Just Jap items - RRP $200

7. $50.00 - R34 2 x Whiteline rear subframe bushings brand new (these retail for $220 for 4)

8. $25.00 - R34 2 x Rear red diff end bushings brand new

9. $30.00 - R34 Whiteline rear subframe pineapples almost new were in the car for less than 1,000km as replaced the cradle bushings!

10. $80.00 - R34 Turbo SS Dump Pipe - Just Jap item brand new with hardware!

11. $100.00 - R34 Manual TURBO SEDAN Rear diff center removed at 65,000km was silent/smooth before it was upgraded to a 1.5way

12. $40.00 - Greddy FATT Turbo timer As-New.

Also have a complete R32 rear cradle setup complete without diff $100 pickup from Sth Brisbane! - GONE!

Text me on 0435029573 if interested on any of the above items.

Edited by lowbro

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • As I've said elsewhere, I am using the stock intercooler piping path in the engine bay, and a return flow cooler, and making ~250 rwkW (without any effort put into trying to turn it up past there just yet) and expect to be able to make some more, and frankly, I would be perfectly happy with 260-270rwKW. This is peak road Skyline usability territory. You go past there and, sure, the car will snap necks more when it's on boost, but it will also break shit all the time, cost a (even larger) fortune in tyres, etc etc. Anyway, I also do not like the over-the-fan pipe path, and you don't have to do it.
    • I see, honestly I’m not too fussed about the looks. The only reason to go plenum is to make the piping easier instead of the classic over the rad etc. 
    • Not easy to quantify wrt something like how many fractions of a second slower it would be over 0-100. But given that a 250-300rwkW car is able to do that launch sprint in 5-6 sec (and faster with appropriate tyres, and surface)..... giving up as much as a second would feel like torture. A ~450HP capable turbo is not going to make lots of boost in the 2000-3000 rpm range. So, whilst with some boost on hand it will be faster accelerating in that rev range than your engine currently is NA, it will not feel like a fast car until the boost is solidly in. You know what your car feels like right now when you open it up at 2000rpm. if you've ever been in an actual fast car, you will appreciate that the NARB25 is.... not exciting. Well, add some boost and it will be better. But shorten the intake runners and it might not be better at all. It might come out better, but it could end up feeling the same. For me, it's not the 0-X km/h sprints that matter. It is easy to fry the tyres with anything over 200 rwkW. You can't use all the power available in 1st and 2nd anyway, you have to modulate the throttle. What matters is how the car reacts when you're driving in traffic in 4th or 5th and have maybe 2000 rpm on board, and you want/need to add some speed quickly, and don't have time for the downshift. It won't make boost, it will be all NA (at the speeds we're talking about - remember how fast you're going at 2000 in 4th! and don't plan on breaking the limit by too much.) So giving away NA torque is not what I would consider practical for a street car. And retaining that NA torque builds boost faster which makes the car faster. The flashy plenum is not actually better, unless you're looking at a track car where you can keep it on the boil all the time.  
    • So how much difference does it make you think? Like 1 second in the 0-100?  I was have smaller turbo so hopefully that spools quick GTX2871.  currently it’s NA so you can imagine pretty slow, but I do want fast accusation a little as there’s not many places I’ll be driving where I go over 80 even near me. So 0-60 and 0-80 targets   
    • Short inlet runners cost quite a bit. Dulls off the off-boost torque, and delays boost onset, because arrival of boost is driven by gas flow is a product of the ability to flow air which is torque. This is the reason that the stock manifolds have longer runners. On a 3L, or bigger, you can usually accept the compromise of giving away some torque because the extra capacity gives you a little extra to waste. But on a smaller motor, there's not a lot there to start with. Example, I swapped RB20 out of my R32, 25NeoDET in its place. The "wall of torque" that I experienced afterwards made it all worthwhile. That's because I came from RB20 land where torque is not a thing. But I would not do anything, anything at all, to reduce the low/mid torque I have now, because I remember what it is like to not have it!
×
×
  • Create New...