Jump to content
SAU Community

Recommended Posts

Rota Wheels 18x10 dual PCD 5x114.3/5x100 +20 for sale. These are a great set of wheels that will fit most Skylines and still clear large caliper brake kits.

Wheels are in near new condition with no rash but don't come with centre caps.

The full set includes 2x 275/35/18 Kumho (new) and 2x Yokohama Advan 265/35/18 A048 with approx 50% tread left.

If you want the full set as is, can leave the A048's on (yes they're mismatched, but they are a spare set of wheels). But if you'd prefer to fit a better set of street tyres, then I can remove the A048 and drop the price to $1250. But you will need to fit another set of tyres to the other wheels. Probably a good thing anyway as you can fit another set of 275's and have even widths all round.

Price:

$1500 for the whole set as is

$1250 minus the Advan's

Happy to drop off free of charge anywhere in the Perth metro area.

Cheers!

post-2132-0-96414600-1420779809_thumb.jpg

Hi mate

No.

The 275 Kumho's are newly fitted and staying on two of the wheels, the other two wheels have 265 Advan's on them with about 50% tread (they are mismatched as I mentioned previously).

If someone wants the whole lot as is for $1500 and doesn't care about the wheels having mismatched tyre sizes, that's cool. However, if it's a problem and someone doesn't want the 265 Advan's, but still wants the wheels, I am happy to remove the Advan's from two of the wheels and drop the price to $1250. Which leaves the 275 Kumho's on two wheels and another two wheels without tyres, which allow the buyer to fit their choice of tyre.

Hope that clarifies a bit for everyone.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...