Jump to content
SAU Community

Recommended Posts

Found some parts in my shed I never used on my Stagea which is now long gone.

Prefer pickup from Brisbane, Milton, Ashgrove, Camp Hill areas. Parts are in Camp Hill until next week then off to Ashgrove.

Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 ono

Maroon/dark red front and rear pods, one has small crack, one scuffed - $50 ono

RB25DET rocker covers, was going to replace my ones with cracked bolt holes, some bolts/washers included - $100 ono

Front strut bar with original RS Four sticker - $100 ono

Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 ono

Cover/handle/plastic trim from left side of front passenger seat - $30 ono

Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 ono

Set of rear seat belts with good condition tensioners - $75 ono

Cup holders, I believe someone has hacked this one a bit - $25 ono

Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5

Photos (if uploads fail): https://www.dropbox.com/sh/zb87qo243etfc6d/AAD0vHQoHjmVVJ6AC4CmzgtMa?dl=0

  • 2 weeks later...

if u still have that cup holder i might be interested. do u have any pics showing where its been "hacked"??

Gidday Ray, I'll grab some closer pictures tonight when I find the box of stuff

These are photos that depict the cup holder screw points seem to have been filed/attacked.

Just seem to be the front screw mount on left and right side. Rearwards screw mounts are intact.

The mechanism to pop the cup holders still works fine too

post-104791-0-83392800-1423570494_thumb.jpg

post-104791-0-49438100-1423570562_thumb.jpg

post-104791-0-01099700-1423570639_thumb.jpg

Edited by wookster
  • 2 weeks later...

Need this stuff out of my shed. Prices reduced (cannot edit original post). Make some offers!



Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 $80 ono


RB25DET rocker covers, was going to replace my ones with cracked bolt holes, some bolts/washers included - $100 $80 ono


Genuine adjustable front strut bar with original RS Four sticker-$100 $80 ono


Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 $80 ono


Cover/handle/plastic trim from left side of front passenger seat - $30 $20 ono


Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 $125 ono


Set of rear seat belts with good condition tensioners - $75 $60 ono


Cup holders, I believe someone has hacked this one a bit - $25 $20 ono


Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5


45V4 - standard turbo off my WGNC34 RB25DET NEO6 Stagea worked perfect. No discernable shaft play - $250 $225 ono


  • 3 weeks later...

This stuff is still around; continually reducing until someone gets it.



Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 $60 ono


RB25DET rocker covers, was going to replace my ones with cracked bolt holes, some bolts/washers included - $100 $60 ono


Genuine adjustable front strut bar with original RS Four sticker-$100 $70 ono


Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 $70 ono


Cover/handle/plastic trim from left side of front passenger seat - $30 $10 ono


Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 $115 ono


Set of rear seat belts with good condition tensioners - $75 $40 ono


Cup holders, I believe someone has hacked this one a bit - $25 $15 ono


Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5


45V4 - standard turbo off my WGNC34 RB25DET NEO6 Stagea worked perfect. No discernable shaft play - $250 $200 ono


  • 5 months later...

Only these parts left! Prices dropped further



Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 $50 ono


Genuine adjustable front strut bar with original RS Four sticker-$100 $70 ono


Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 $65 ono


Cover/handle/plastic trim from left side of front passenger seat - $30 $10 ono


Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 $110 ono


Set of rear seat belts with good condition tensioners - $75 $40 ono


Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...a little refresh. Is Nistune gonna be enough to run BoV? Or do i need some proper ECU? 
    • Yep that's pretty much what I want to see. Racecars that look and sound like the Group A but with newer tech underneath to make them faster and safer. I'm sure there's enough VK-to-VN commodore, E30 BMWs and Foxbody mustangs shells around to make up a decent number of cars with hopefully a couple of sierras, rx7 and R31s in there too. 
    • Contact Jessestreeter.com/Skevas Racing/JustJap for a new r34 rb gearbox or go a cd00# conversion. No point playing with unknown condition gearboxes.
    • Such a shame places like Amaroo Park have been redeveloped, smaller tracks always make for good racing. Cheers for sharing @PranK there's some good Lakeside video's too. Its so hard with older the cars as parts are so rare and everything was made for a particular chassis at that point in time. Even the V8 Supercar Blueprint era cars are all different between each chassis within a team as they learnt things and made improvements. The COTF cars between each Chassis builder is different too especially motor/oil systems/intakes. The Group A stuff is worth so much too especially chassis with good history. The only way to do it would be composite panels and similar engine drivelines to the original cars. Ford sierra running Focus RS driveline, Commodore running a short stroke LS/LT or a Falcon with coyote and a H Pattern dog box. Could use a standard ecu across all models with a Torque Map and DBW for parity which is not even used in Supercars currently. Hell a TCM is almost a full chassis car these days and the suspension is not even close to standard style in the front running cars.  
    • Dashcams Australia (13/05/25) captured JDMHSE (Vic plate) being a right tosser. 
×
×
  • Create New...