Jump to content
SAU Community

Recommended Posts

Found some parts in my shed I never used on my Stagea which is now long gone.

Prefer pickup from Brisbane, Milton, Ashgrove, Camp Hill areas. Parts are in Camp Hill until next week then off to Ashgrove.

Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 ono

Maroon/dark red front and rear pods, one has small crack, one scuffed - $50 ono

RB25DET rocker covers, was going to replace my ones with cracked bolt holes, some bolts/washers included - $100 ono

Front strut bar with original RS Four sticker - $100 ono

Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 ono

Cover/handle/plastic trim from left side of front passenger seat - $30 ono

Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 ono

Set of rear seat belts with good condition tensioners - $75 ono

Cup holders, I believe someone has hacked this one a bit - $25 ono

Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5

Photos (if uploads fail): https://www.dropbox.com/sh/zb87qo243etfc6d/AAD0vHQoHjmVVJ6AC4CmzgtMa?dl=0

  • 2 weeks later...

if u still have that cup holder i might be interested. do u have any pics showing where its been "hacked"??

Gidday Ray, I'll grab some closer pictures tonight when I find the box of stuff

These are photos that depict the cup holder screw points seem to have been filed/attacked.

Just seem to be the front screw mount on left and right side. Rearwards screw mounts are intact.

The mechanism to pop the cup holders still works fine too

post-104791-0-83392800-1423570494_thumb.jpg

post-104791-0-49438100-1423570562_thumb.jpg

post-104791-0-01099700-1423570639_thumb.jpg

Edited by wookster
  • 2 weeks later...

Need this stuff out of my shed. Prices reduced (cannot edit original post). Make some offers!



Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 $80 ono


RB25DET rocker covers, was going to replace my ones with cracked bolt holes, some bolts/washers included - $100 $80 ono


Genuine adjustable front strut bar with original RS Four sticker-$100 $80 ono


Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 $80 ono


Cover/handle/plastic trim from left side of front passenger seat - $30 $20 ono


Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 $125 ono


Set of rear seat belts with good condition tensioners - $75 $60 ono


Cup holders, I believe someone has hacked this one a bit - $25 $20 ono


Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5


45V4 - standard turbo off my WGNC34 RB25DET NEO6 Stagea worked perfect. No discernable shaft play - $250 $225 ono


  • 3 weeks later...

This stuff is still around; continually reducing until someone gets it.



Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 $60 ono


RB25DET rocker covers, was going to replace my ones with cracked bolt holes, some bolts/washers included - $100 $60 ono


Genuine adjustable front strut bar with original RS Four sticker-$100 $70 ono


Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 $70 ono


Cover/handle/plastic trim from left side of front passenger seat - $30 $10 ono


Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 $115 ono


Set of rear seat belts with good condition tensioners - $75 $40 ono


Cup holders, I believe someone has hacked this one a bit - $25 $15 ono


Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5


45V4 - standard turbo off my WGNC34 RB25DET NEO6 Stagea worked perfect. No discernable shaft play - $250 $200 ono


  • 5 months later...

Only these parts left! Prices dropped further



Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 $50 ono


Genuine adjustable front strut bar with original RS Four sticker-$100 $70 ono


Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 $65 ono


Cover/handle/plastic trim from left side of front passenger seat - $30 $10 ono


Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 $110 ono


Set of rear seat belts with good condition tensioners - $75 $40 ono


Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...