Jump to content
SAU Community

Recommended Posts

Found some parts in my shed I never used on my Stagea which is now long gone.

Prefer pickup from Brisbane, Milton, Ashgrove, Camp Hill areas. Parts are in Camp Hill until next week then off to Ashgrove.

Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 ono

Maroon/dark red front and rear pods, one has small crack, one scuffed - $50 ono

RB25DET rocker covers, was going to replace my ones with cracked bolt holes, some bolts/washers included - $100 ono

Front strut bar with original RS Four sticker - $100 ono

Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 ono

Cover/handle/plastic trim from left side of front passenger seat - $30 ono

Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 ono

Set of rear seat belts with good condition tensioners - $75 ono

Cup holders, I believe someone has hacked this one a bit - $25 ono

Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5

Photos (if uploads fail): https://www.dropbox.com/sh/zb87qo243etfc6d/AAD0vHQoHjmVVJ6AC4CmzgtMa?dl=0

  • 2 weeks later...

if u still have that cup holder i might be interested. do u have any pics showing where its been "hacked"??

Gidday Ray, I'll grab some closer pictures tonight when I find the box of stuff

These are photos that depict the cup holder screw points seem to have been filed/attacked.

Just seem to be the front screw mount on left and right side. Rearwards screw mounts are intact.

The mechanism to pop the cup holders still works fine too

post-104791-0-83392800-1423570494_thumb.jpg

post-104791-0-49438100-1423570562_thumb.jpg

post-104791-0-01099700-1423570639_thumb.jpg

Edited by wookster
  • 2 weeks later...

Need this stuff out of my shed. Prices reduced (cannot edit original post). Make some offers!



Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 $80 ono


RB25DET rocker covers, was going to replace my ones with cracked bolt holes, some bolts/washers included - $100 $80 ono


Genuine adjustable front strut bar with original RS Four sticker-$100 $80 ono


Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 $80 ono


Cover/handle/plastic trim from left side of front passenger seat - $30 $20 ono


Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 $125 ono


Set of rear seat belts with good condition tensioners - $75 $60 ono


Cup holders, I believe someone has hacked this one a bit - $25 $20 ono


Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5


45V4 - standard turbo off my WGNC34 RB25DET NEO6 Stagea worked perfect. No discernable shaft play - $250 $225 ono


  • 3 weeks later...

This stuff is still around; continually reducing until someone gets it.



Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 $60 ono


RB25DET rocker covers, was going to replace my ones with cracked bolt holes, some bolts/washers included - $100 $60 ono


Genuine adjustable front strut bar with original RS Four sticker-$100 $70 ono


Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 $70 ono


Cover/handle/plastic trim from left side of front passenger seat - $30 $10 ono


Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 $115 ono


Set of rear seat belts with good condition tensioners - $75 $40 ono


Cup holders, I believe someone has hacked this one a bit - $25 $15 ono


Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5


45V4 - standard turbo off my WGNC34 RB25DET NEO6 Stagea worked perfect. No discernable shaft play - $250 $200 ono


  • 5 months later...

Only these parts left! Prices dropped further



Maroon/dark red rear bar with black bump strip, cut in bar for larger exhaust - $100 $50 ono


Genuine adjustable front strut bar with original RS Four sticker-$100 $70 ono


Set of 6 working (when pulled from engine) RB25DET Neo6 coilpacks - $100 $65 ono


Cover/handle/plastic trim from left side of front passenger seat - $30 $10 ono


Full set (front [DB1696GCT] and rear [DB1399GCT]) of Bendix brakes for WGNC34 - $150 $110 ono


Set of rear seat belts with good condition tensioners - $75 $40 ono


Random oil filter (Bosch ON 052) that might not even be for RB25DET - $5


Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • LOL, when one "money pit" is never enough Noice, and excellent work mate
    • I have more than enough digging, laying blocks, moving gravel, airrating, feeding and top soiling the grass, and setting up the veggie gardens growing some seedlings,  and then removing all the unused rock to keep me busy for the next few months at least,  hopefully the rain stops soon so I can get a few hours in this arvo, but, before that Sunday is washing day, is every body happy, you bet your life we are Nice country road day drives are a day off whenever I'm muscle sore from all the landscaping at the moment, but, more epic multiple day drives will start once the majority of the big jobs outside are completed
    • I hear that would involve some nice country road drives into the hills for Mark...
    • I thought I'd come back and add something I JUST learned. A Toyota LandCruiser with a 1HZ, mates perfectly with a bottle of Nulon brake fluid. As in, it perfectly screws in. Great make shift funnel when you cut the bottom of it off. This may work for your Corolla.   Unfortunately, tipping a 10L drum is much harder than a 4 to 6L bottle, and they no longer include the easy pour tap which was just perfection to use previously.  
    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
×
×
  • Create New...