Jump to content
SAU Community

Recommended Posts

Hey guys

Looking for opinions on paint damage to the roof of my R32 GTR

The car was resprayed in the original colour in Japan and whilst a good finish, the roof has a few spots where there is damage to the paint, under the clear coat.

I have had a quote to respray the whole roof (removing all glass) and fix crazing on some plastics components for $2k. By the time i buy new trim pieces from nissan and pay to remove/refit glass it will be close to $3.5k

Sorry but to the point i was wondering if anyone is aware of any other options other then a full respray of the roof as its isolated to a few areas only. Im also not quite sure what paint damage it is.

Here are some pics:

post-15055-14231999838324_thumb.jpgpost-15055-1423200002098_thumb.jpg

Cheers Jase

Edited by gts25
Link to comment
https://www.sau.com.au/forums/topic/453566-opinions-on-r32-gtr-paint-damage/
Share on other sites

no real options, you cant get away with a fade out on a roof. if the job wasnt done properly and there is damage under the clear then its a strip back and repaint. if its not done properly then your gonna end up back in the same position

Haha I'm sure it won't be the last time you open your wallet for the GTR. Unfortunately most peoples wallets are continuously open while owning a GTR, including mine.

Just make sure the people fixing the paint strip it right back otherwise the problems might arise again in the future. Some shops will just scuff the paint back and spray over the top unfortunately.

  • 4 weeks later...

Hello! I don't think it can be fixed in other way than repainting. I had such problems with my car too. I had to repaint the whole roof. Then I applied a colour protector from colourshield, and everything has been OK with it so far. Hope, I will never have to do it again...

Edited by trevordd

I have been back to the panel beater and yep it needs to be resprayed. Roof is going to be stripped right back and resprayed, down the a pillars and the rear quarters. Whilst they have the car I am having all plastic components repsrayed (grille, N1 kit, mirrors, tail lights etc).

Job will be done properly and all glass will come out. The great thing about it is the windscreen guy they use is going to use a generic rubber over the edges and over the front and rear windscreens rather then me forking out $800 for the original trim kits. The screens will be removed, reinstalled and custom rubber install done for <$500

Will be done in the next few months..

  • 8 months later...

hey guys

to wrap this thread up properly, i had my car resprayed last week (roof, rear quarters with glass out and most plastic parts) and picked it up yesterday

it came out fantastic. heres a shot of the roof:

post-15055-14487945134986_thumb.jpg

as previously discussed a generic rubber was used out on the outside of the screens instead of the expensive nissan trims kits. in my opinion it looks just as good if not better then the multiple piece trim kit. all up to remove and reinstall glass with genuine inner clips and generic rubber was approx $500.

heres what the rubber looks like

post-15055-14487949191599_thumb.jpg

post-15055-14487949472575_thumb.jpg

post-15055-14487949943393_thumb.jpg

stoked with how the car came out

got the work done at johns twins in wollongong. cant speak highly enough of their work and customer service

terry - unfortunately i was interstate when the work was done so i didnt speak to the windscreen guy. the rubbers look to be of good quality

jase

Edited by gts25

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes I can see how that would put you off HFM, especially with the price of good quality brake fluid. From what I understand it as you say the BM50 is the standard BMC for a R32 GTR, I must admit I would like to go far a Genuine Nissan BM57, but lack of cash prevents that at present. With the price being so close between the genuine BM50 and BM57 a BM57 New it seems a better choice as you gain that 1/16 bore size with the BM57, I would be interested in how much difference you feel with the BM57 fitted. I am going to take SteveL's advice in the short term and see how much actually comes out of that proportioning valve vent and save up for the Genuine Nissan part. Thanks for clarifying the HFM failure
    • Thanks mate. I just got the post inspection 1/2 done from state roads when the starter motor packed up, either that or the car alarm system is having trouble.  OEM part number 23300-AA112.
    • Hi, I though I was coming to an end in finding a replacement starter motor for a rb25de neo. I came across a starter motor from Taarks and a message below stating: Direct fit. 11 Tooth count. All below part numbers have been superseded to 11 teeth. Can some body shed some light on going from 8 teeth to 11 teeth apart from 36-month / 25,000 km warranty for passenger vehicles to 12 Month Warranty. Compatible with the following Nissan part numbers: 23300-20P00 23300-20P01 23300-20P05 23300-20P10 23300-20P11 23300-AA111 23300-AA112 23300-AA300 23300-08U10 23300-08U11 23300-08U15  
    • Low battery? Maybe check capacity? I know first-hand, on BMWs if your battery drops below 80% capacity, it starts causing strange issues.
    • 8.5 +37 = should fit rear, but I think it'll hit on front. What you want is low 30s/high 20's front, mid 30's rear. That 17" screenshot you posted looks good, I'd run it on my R32 (but that's long dead now). For tyre sizes, my rule of thumb is: 8': 235, 9": 255. But that's just my opinion. Nismo sizes: 18x8.5+35/18x9.5+38 is a good starting point.
×
×
  • Create New...