Jump to content
SAU Community

R33 Series 2 Mirror Control

Brad13

By Brad13,
in General Maintenance

 Share

Recommended Posts

Brad13 Contributor

Brad13

Posted
Posted

Hey guys, I recently bought an R33 Series 2 GTST and am having a problem with the electric mirrors. I can't adjust or retract/extend either mirror, it's as if they're not connected. I've checked the switch and it all seems to be hooked up alright, I've checked the fuses in the drivers footwell and none seem to be blown (Not 100% sure which fuse is for the electric mirrors) .As both mirrors aren't working and neither makes any noise when I try to move them the only other thing I can think it might be is that the mirror control switch is playing up. Can anyone here confirm that this would likely be the problem or has anyone experienced this before?

Apologies if there is already a thread about this, I know there is another one that's but it only seems to be when one mirror isn't working, not when all controls seem to have gone. Thanks in advance!

Link to comment
https://www.sau.com.au/forums/topic/453727-r33-series-2-mirror-control/
Share on other sites
Duncan Grand Master

Duncan

Posted
Posted

yep I've had exactly that problem....when I had the dash out and didn't plug the mirror switches back in.

they are pretty easy to get to and just pop out forward....so give that a check first

Brad13 Contributor

Brad13

Posted
  • Author
Posted

I tried a different switch from a mate of mines r33 with no luck. I ended up pulling off the door cards to see what was going on behind there and found thispost-138925-1423647769949_thumb.jpg

Another connection had been plugged in but was cut off and went nowhere. Found the mirror plug was just sitting there. This was the same on both sides. Plugged the mirrors back in and they both work now!

Absolutely no idea what the other plug was doing in there. Now I just need to work out how to make the mirrors fold in and out as when I switch it to that it still just seems to angle the mirror as normal.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...