Jump to content
SAU Community

Garrett 3071r

Noddy
 Share

Recommended Posts

Noddy Proficient

Noddy

Posted
Posted

Only used on weekends on race tracks. I've changed to a larger engine configuration using a twin turbo setup.

I ran this on an RB25 with a 6 boost manifold at 12-15 psi making 300 to 340rwhp respectively. MTQ built the turbo using a modified T04B front cover for better response at lower rpm with a wider power band. An added bonus is the better bonnet/tower/cam cover clearance.

This is a 2nd hand item. It has had roughly 2 seasons use across 5 years. (Divorce slows racing down a little it seems) The shaft has minimal play and is in good working order.

$600, located in Dalby and can deliver to SEQ.

0411090019 Stuart.

post-15176-14236583938409_thumb.jpg

post-15176-14236584200504_thumb.jpg

post-15176-1423658445563_thumb.jpg

post-15176-14236584852524_thumb.jpg

post-15176-14236585059375_thumb.jpg

post-15176-14236585386396_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/453768-garrett-3071r/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • tidi0x
      Wheel Sizes & Offsets For Skylines

      By tidi0x · Posted

      Wanted to add some of my R33 GTST  R34 GTR wheels, 18x9 ET30 with 255/35/R18 PS4S'   BBS RE-V7 029 18x9.5 ET22 with 255/35/R18 PS4S' Needs a bit of camber   
    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      Lamb roast on Saturday will be different 🥲
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...