Jump to content
SAU Community

Recommended Posts

Hi guys,

well pretty soon I am getting an R32 GTR. I just have a few questions Id like to ask.

1. Is it possible to run it just in rear wheel drive on the dyno just by pulling the 4WD fuse?

2. What sort of power can I expect from full exhaust, intake, intercooler, boost up and maybe power fc or similar management, with stock turbos.

3. And what kind of 1/4 mile can I expect from these kind of mods.

4. What would a low 12 sec 1/4 be in an 1/8th mile drag? Because the only strip around Sunraysia is an 1/8th mile.

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/4541-r32-gtr-questions/
Share on other sites

flat 8sec 1/8 mile is around 12-12.3 however dont be discouraged if it runs slower as you are only just starting on third gear over the 1/8 in a gtr, which hinders you as the skyline has alot more top end then people realise!! the fastest gears in a skyline releative to the gearing ect.. ect.. are 3rd and 4th. i would not be suprised to see a gtr run a 8.5 1/8 mile then do a low 12 high 11 1/4.

Link to comment
https://www.sau.com.au/forums/topic/4541-r32-gtr-questions/#findComment-71327
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...