Jump to content
SAU Community

Recommended Posts

the mod chip does pretty much everything.. no need for a swap disk either.

goto www.mod-chip.com to look at install instructions .

this chip will only work on the V9/V10 ps2 which is schp - 5000x.

asking price is $55 including postage. this is worth about $200 installed so the chip itself is worth about $80-100.

Link to comment
https://www.sau.com.au/forums/topic/45483-brand-new-neo-12-mod-chip-for-ps2/
Share on other sites

well if you have a newer playstation, ( version 9 or 10 ) you can use this chip. its only a 12 wire install which is the smallest amount on all the other ones. if you go to the site thats on the first post you can look up all the info you need

Cyclonus you'll need to use the DUO 2 chip.. you don't need a swap disc, and it's a 17 wire install. the points aren't too hard but if your not good with a soldering iron get a pro to do it, as i found out the hard way with a ps1

pm me for more info

sorry mate but installed chips are about $100 these days (what i charge), nowhere near $200, chips are worth about $15 btw

cheapest i've seen chips for are around $60 - $70 aus.

i've found a cheaper place to get them from so. new price -

Neo 12 V.9 - V.10 ( i have 1 left, might be able to get more ) - $35 + postage

Duo 2 V.1 - V.10 ( i have 1 but can get some more ) - $40

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Absolutely could be. I collected data logs from when the O2 sensor was still out and also after I had replaced it so will try to compare them. Pretty confident that the affect is lowered with the new sensor, will check logs at the same RPMs/conditions. 
    • Hey guys Long time lurker, I daily a nm35 stagea 250t rs four and I've had it for almost 2 years (very reliable 👌). Issues or just looking for information ill always find myself here having a read, so thought id join.  3inch stainless intake, pod filter, AM performance turbo dump pipe, 3inch hotdog, 3 and half inch stainless to 3 and half inch AM performance blast pipes. Bc racing coilovers. 18inch rims Hdi intercooler and trans cooler soon.  Here's my car
    • thanks for the advice on the box... i was thinking the 6 speed was better for cruising on the highway but on closer inspection and comparison the Rb 5 speed box was not too different...  So the choice is going to be the RB25 box... if I can save up and find one at the right price  
    • Thanks Matt, yes that's what i am aiming for. Just going to apply the right voltage and grounds to the dash connector. Hence my search for these pins... any chance you know if these pins are in the same spot as the ones on the S15 Dash connector? as mentioned above on page 8?
    • Yes, unfortunately that's the one. Signal was noisy to begin with; after driving once and looking back at the logs I saw pressure constantly swinging between 0-200psi, or staying at 0 randomly for a few seconds. There's a lot of good sensors that share the same look and feel, so don't presume they're all bad. I bought mine for 20$ off Amazon and I should have read the reviews prior, as it's clear they're junk.  I purchased a lowdollerr motorsports sensor. 
×
×
  • Create New...