Jump to content
SAU Community

Mint Rota Gr6-2r 18x10+15 & Stock R33/s14/stagea Forged Wheels

SKYNET
 Share

Recommended Posts

SKYNET Mentor

SKYNET

Posted
Posted

Putting up my spare sets of wheels,message me with an offer if you need any.

Pickup only at this stage from Sunnybank South Brisbane.

-Rota GR6-2R 18x10+15 mint rims with no damage at all.

All Achilles ATR 245/40/18 tyres have 90% tread.

Perfect fitment for r32 GTR's.Can be made to fit series 1 & 2 Stagea's although you will need coilovers,adjustable rear camber arms & the rear gaurds will have to be rolled & flared too.

$1000 ono

-Stock s15 rims all in good condition,some have scratches on rim face.

All Zetum tyres are 95% evenly worn tread.

$450 ono

-Stock 16x8 forged mesh Stagea rims,tyres are all dead.

Rims need a cleanup & respray.Outer edge is polished too.

$250 ono

-Stock r33/s14/200sx rims in good condition.

Two tyres are ok for skids,other two are dead.

Paint is a bit faded on rim face.

$150

I'll add more pic's later.

post-59075-0-92138600-1427603310_thumb.jpg

post-59075-0-30110800-1427603350_thumb.jpg

post-59075-0-18489500-1427603447_thumb.jpg

post-59075-0-88510600-1427603499_thumb.jpg

post-59075-0-14920300-1427603600_thumb.jpg

post-59075-0-18466900-1427603692_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Sleepergm
      Max horse power stock internals?

      By Sleepergm · Posted

      And yes would be going to tomei Japan for sure as it’s closer to me … 
    • Sleepergm
      Max horse power stock internals?

      By Sleepergm · Posted

      Yeah I heard the same. Might be hard to order one. But then I guess can go to hks or go to a more expensive n1 block with tomei. Guess will jump the hurdle once I get there next upgrade around. I can’t get work done in the states as the lead time will take for ever on top of shipping to Hong Kong. 
    • joshuaho96
      Max horse power stock internals?

      By joshuaho96 · Posted

      https://www.platinumracingproducts.com/en-us/products/nissan-rb26-cast-blocks This is the solution I was thinking of. I would stay away from Tomei USA, their quality is a question mark to me. If you want an engine machined in the US contact Club DSPORT: https://clubdsport.com/ Tomei JP is probably fine but I recall they stopped doing pre-assembled short or long blocks. In general it's pretty tough to get any kind of RB26 block at the moment with Nissan so severely backordered.
    • joshuaho96
      Nismo front and back LSD

      By joshuaho96 · Posted

      PAR specifically offers stock ratios in their gearset and you could do whatever ratios are physically possible supposedly for no extra cost. I agree 6 ratios is better than 5, the factory 2nd gear is equivalent to the Getrag 2nd gear if you account for the differing final drive ratio though. The Getrag 3rd gear with a 3.916 final drive is equivalent to a 1.6 2nd gear in the FS5R30A. I'm about to swap the transmission out on my car, I'm tempted to send the one I have now out for rebuild with the standard "cross ratio" gearsets out there to see if it really makes such a big difference the next time I pull the transmission.
    • Sleepergm
      Max horse power stock internals?

      By Sleepergm · Posted

      This is what I was looking at next:  https://www.z1motorsports.com/engines/tomei/tomei-rb26-28l-short-block-assemblies-p-45479.html as we can’t bore the cylinders out in hk so better just buy the whole lot in one and install then retune. Everyone saying the weak link are the bolts holding the rods together. I already did valve springs, arp head bolts, hks racing coils, nismo fuel pumps and pressure regulators, injectors etc for the top of the engine. 
×
×
  • Create New...