Jump to content
SAU Community

Recommended Posts

Seat base might smell if it gets wet - and I persoanally don't want to be around.

*Edit - just noticed the typo - but I'll leave it there.

Nice morning this morning. :)

No smell at all. I just didn't want to allow it to get wet during the intense low pressure system over the past few days. PM me for bank details if you will. And I'll grab your address in the process. Regards Tez

I've been asked if I can reduce the price of the White GReddy Gracer side skirts for the R32. If I'm doing this for him, I'll do it for all. $380

I got the rear interior window trims back today. They look alright but Bryan cannot get rid of all the bubbling. Pics to follow tomorrow but I cannot in all honesty charge any more than what I paid for his labour which is $100

You'll understand why I'm only charging $100; but at least there's no cracking.

Trim-3_zpssnaoncs2.jpg

Trim-4_zpsgal4qcra.jpg

Trim-1_zpsfqnrubrw.jpg

Trim-2_zps2e8bc5rw.jpg

You'll notice there is a small patch over where the corner is most stretched.

The PO man told me last week that there'd be no problem bagging the seat base. But when it came time to post it, no Aust Post packaging would accommodate it. Had to scavenge a Nissan box quick smart. I do hope it was unmolested Frank. I would have preferred to bubble wrap it as well. Again, apologies.

A Lay-by has been placed on the GReddy Gracer side skirts.

Balance needs to be completed by 1st November.

Tomei sump baffle plate has been reserved too.

  • 1 month later...

GReddy Gracer Side Skirts

...are back up for sale.

Reduced to $350 due to forfeiture of a deposit.

I'll also throw in Rear Pods - unless they're not required.

Or, I'm willing to separate and sell the pods first for $90

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
×
×
  • Create New...