Jump to content
SAU Community

Recommended Posts

Hi all, have been searching for a few days, and can't find the exact cause to my issue. My r33 gtst wont slow down when I deacclerate without the pushing the brake pedal. Mostly noticeable in a car park when doing 10kms it keeps a constant speed without my foot on the accelerator. When I push the clutch in to park it idles around 1500 for 3 seconds and drops to normal. I have cleaned my iac valve, and going to clean my afm tomorrow. Has anyone had this issue before? Any help would be greatly appreciated.

Link to comment
https://www.sau.com.au/forums/topic/455898-idle-issue/
Share on other sites

Sometimes you get the check engine light. Sometimes you don't :(

Codes can tell you if you have access via a scan tool

You can use a multi meter to test it on or off the car. - Just google testing 02 sensor :thumbsup:

or just Take it out, visually inspect, clean and refit. Still got the issue then go further :)

Link to comment
https://www.sau.com.au/forums/topic/455898-idle-issue/#findComment-7519513
Share on other sites

I cleaned my afm and idles better. Will need to take it for a drive to see results. I put my hand over the afm while idling to see if any leaks and it stalled. Is this normal?

Probably.

That's not a normal thing to do and won't check anything.

Link to comment
https://www.sau.com.au/forums/topic/455898-idle-issue/#findComment-7520698
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...