Jump to content
SAU Community

Recommended Posts




Now with the exhaust is different , I didn’t go with Chinese brand like what I’ve got now and FYI I didn’t have that install it was from previous owner , it’s still loud but I don’t like it as it didn’t sit very well.

With genuine Nissan’s exhaust yea it’s good but it’s not loud enough like how I want it.

So I go with HKS , it’s loud enough than the current.


Now questions - do I need to re-tuned the car with the new exhaust ? What about the horse Power , would it impact ?

If it's a cat-back system it won't affect the stock ecu tune. It will have sensors before and after the cat converters so it should just flow more at high revs and sound awesomeness at idle. If the original Nissan system had reactive mufflers at the rear and not straight through you might loose a bit of bottom end torque but gain more power at higher r.p.m. A proven hks product will just bolt on and be mint for what you want (moar top end and moar noisy) unless you've changed the tube size.
Sounds like the bushes are dead! 
I noticed when we went to mighty car mods you had a massive clicking at the front end like cvs on full lock when parking. Won't be anything to do with clunking though.
  • Like 1
I noticed when we went to mighty car mods you had a massive clicking at the front end like cvs on full lock when parking. Won't be anything to do with clunking though.
I would think the upper control arm bushes could be pressed out and replaced from experience. But I've never owned a highly technological beast like your bad boy. On the cars I've owned it would be just do both sides with nolathane's? Red bushes are stiffer and faster.
  • Like 1
I would think the upper control arm bushes could be pressed out and replaced from experience. But I've never owned a highly technological beast like your bad boy. On the cars I've owned it would be just do both sides with nolathane's? Red bushes are stiffer and faster.
With what you've been paying galvsport they should be providing you with the proper information and pricing?
  • Like 1
With what you've been paying galvsport they should be providing you with the proper information and pricing?



They did ! And what Nissan’s want $2300 one month eta !

And Galvsport wants $1700 :) but not sure with the eta , I think he prob order them from just jap
I would think the upper control arm bushes could be pressed out and replaced from experience. But I've never owned a highly technological beast like your bad boy. On the cars I've owned it would be just do both sides with nolathane's? Red bushes are stiffer and faster.


You think alike with dave , he said that before but guess the qualified mechanics should knows better lol no offense! [emoji23]
  • Like 1
I noticed when we went to mighty car mods you had a massive clicking at the front end like cvs on full lock when parking. Won't be anything to do with clunking though.



Josh said the same thing about having the cvs in full lock - and it’s not a safety concerns.

But the sounds bugging me ! Can you help ?
38 minutes ago, ElleAli76 said:

 

 


They did ! And what Nissan’s want $2300 one month eta !

And Galvsport wants $1700 :) but not sure with the eta , I think he prob order them from just jap

 

 

Get tbe bushes and il do it for a carton lol

  • Like 1



  • Similar Content

  • Latest Posts

    • Actually everyone on the roads was really well behaved. The only person that did any minor tailgating was a local hoon in a Turbo Focus. Unfortunately we weren't going the same way so there was no grand initial D touge battle. Lots of people pulled over and let me through. The amount of "Hey man nice car, omg skyline, nice 34 man woo" was suprising. Like really suprising. Like almost annoying. My partner was obviously surprised, she'd never seen anyone in the real world point out the car/like the car/want to chat about the car before, so to have like 3 people per day mention it was notable, I could finally say SEE? SOMEONE THINKS THEY'RE COOL. Everyone was also pretty suprised about the weather. Every day was dry and about ~13-14C. Mount Wellington had a sign that said they close the gates at 9pm and I was heading up there at about ~7:30. It was VERY apparent that conditions were getting significantly worse by the minute on the way up and down. The road on the mountain was terrible though, it's no driving road. I have various suspension related questions now. Luckily it was only about 20 minutes from where we were staying to the top of the mountain as said Google maps. We only had the 2 nights in Hobart. We went to the Farm Gate Market though which was really good - And went down to the Hastings Thermal springs/caves down there during the day. I'd definitely be up for going back again, so luckily there's a few more sights yet to see. Didn't get to do the west coast/queenstown/cradle mountain so this was supposed to be a 'scouting' trip anyway of sorts if I were to one day do/take part in/organize a more car-focused trip. As for the boat, it wasn't bad. Well it was bad, but not in the way you're thinking. We did the night trip which leaves at 6:45 (though you have to be there ~2 hours earlier) and arrives the next morning at about 6am. There is nothing to do on the ship. If you plan accordingly and bring a book/tablet/show to watch/charger you can just chill out, take some Travacalm and just sleep through it. The food there is an extremely basic buffet that costs $32 a plate, or $14 for a $3 pizza. The way back we had a travel kettle and a few different types of cup noodles and made our own tea/coffee in the room. This was a far superior way to do it. At the very least book one of the rooms with beds. I guess as we were in the off season we didn't have room mates. You get an option for rooms with 4 beds (2x bunks) or a room with just the two bottom beds. There's also some option for a deluxe queen bed but it's much pricer. We've been on sleeper trains in Asia before so we figured this is similar (and it was)
    • You just gotta be really, really, really clear and decisive with what you want your end product to be. 99% of people who want this conversion aren't "I want to run a 295 front tyre!" so they don't really need the widebody. They just want the OEM body to look a little less dumpy, so bonnet, bar, skirts job done with some camber, stretch, slam. It's when you want that, but then decide to pivot later you get big problems. See also if you're willing to get an all in one fibreglass bar, and you're willing to accept fibreglass problems like cracking the entire item on a driveway, instead of just a piece attached to the bottom, etc etc etc. Decide this all before buyin'.
    • After @Kinkstaah debacle, I'd never want to try and get it right 😛
    • The hood lines up with the fenders. The front bar doesn't perfectly line up with the fenders where the wheel arch is. You have to 'squeeze' the front bar 'in' as it wants to naturally flare out and be longer on the sides. There's a few threads where people notice this when they only swap a GTR style bumper and front bar. Unless you have genuine OEM items - you may be better served getting conversion kits. There are GTT bumpers to fit GTR hoods. There are GTR hoods (non genuine) to fit the GTT bracketry. MAY  
×
×
  • Create New...