Jump to content
SAU Community

Recommended Posts



Good luck finding a 6 speed man [emoji17] hard enough with the 5
:-o, just a thought. I get cheesed off with mine spinning through 1st and 2nd then 115kmph is 3000rpm. Brrrrr. Stereo loudness running block.B-)
:-o, just a thought. I get cheesed off with mine spinning through 1st and 2nd then 115kmph is 3000rpm. Brrrrr. Stereo loudness running block.B-)


Our cars don’t really have the balls at 110 to be running at low rpm.

I get ok fuel enonomy at high rpm and still can hit enough boost to get moving without downshifting
  • Like 2
3 hours ago, shoey85 said:

 


Can diff gears be changed?

 

Yep, a lot of 4.1 and 4.3s around. i just found a set of 3.7s on japan auctions ive got coming. Will be a good match for the 6 speed

  • Like 2
13 hours ago, Beyond Blue R33 said:
14 hours ago, shoey85 said:


Good luck finding a 6 speed man emoji17.png hard enough with the 5

:-o, just a thought. I get cheesed off with mine spinning through 1st and 2nd then 115kmph is 3000rpm. Brrrrr. Stereo loudness running block.B-)

Skyline life!! Get a new ecu and have boost by gear, 10psi first, 14psi 2nd, all of it there after

  • Like 1



  • Similar Content

  • Latest Posts

    • Oh, also, forgot to add these photos I believe.
    • Thought i'd update on this. I was able to get in contact with Craig Lieberman and later on Darryl Alison (owner of Kaizo Industries). Darryl was able to help me verify that my car was in fact one of theirs and is helping me find more info on mine !
    • There's restrictor pills in the stock boost control hoses. That's how they set the amount that was bled off and hence the "high" boost setting. The usual mod in the day was to remove it and send the "high" boost setting up to about 14 psi.
    • Thanks Duncan, that's the best info I've read. Furthermore after learning about the PCM programming side controlling the factory boost solenoid, the purpose of the solenoid is to "bleed" boost when pin 25 is earthed, thus allowing spring pressure in the wastegate actuator to overcome diaphragm boost pressure, thus closing or reducing the position of the wastegate flap creating more boost as the turbo is able to spin faster. It's pretty cool to see a designated Pill to do exactly this, would have liked to have seen it with a tiny filter over the end for those moments in vacuum.  The constant bleed pill has now been removed completely from the system and solenoid boost control has been restored once again.   Case closed 😂
    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
×
×
  • Create New...