Jump to content
SAU Community

Recommended Posts

  • 5 months later...

I have done my dash inserts, looks sick......I did it in silver, then put 4 to 5 coats of clear on to it. word of advice is to remove all the silicon coating off the plastic, rermove with thinners only alight whipe with a rag, that breaks down the silicon then you can scratch it off if your finger. lighty sand plastic and use a wax and grease remover to stop fish eyeing then paint! I will post some pics of my dash sometime today!:P

Link to comment
https://www.sau.com.au/forums/topic/4576-painting-my-dash/#findComment-223558
Share on other sites

Guest INASNT

i just did this recently

attachment.php?s=&postid=126582

attachment.php?s=&postid=126583

attachment.php?s=&postid=126589

This is how i did mine.

Sand with light grade paper.

Apply 2 coats of primer, sanding between coats

apply 3 coats of gloss paint

apply 3 colts of fast dry enamel.

of course let each layer of paint and enamel dry before applying new coat.

do it like this and u wont have any pealing off etc.

It will peal off if u just paint it with the gloss paint without priming or applying clear.

Link to comment
https://www.sau.com.au/forums/topic/4576-painting-my-dash/#findComment-224051
Share on other sites

when you mean 3 coats of gloss paints and 3 coats of enamel is it:

1 x gloss paint layer

dry

1 x gloss paint layer

dry

1 x gloss paint layer

dry

1 x dry enamel

dry

1 x dry enamel

dry

1 x dry enamel

or

1 x gloss paint layer

dry

1 x dry enamel

dry

1 x gloss paint layer

dry

1 x dry enamel

dry

1 x gloss paint layer

dry

1 x dry enamel

????

Link to comment
https://www.sau.com.au/forums/topic/4576-painting-my-dash/#findComment-224249
Share on other sites

INASNT:

Im not sure if I like it or not (might be just the blue colour) but thats a top effort.

I've been abit happy in the last few days with the spray can and I have found the black plastic door handle cover on the drivers side (that holds the elec window buttons inplace) to be abit warn and tacky, im sure a nice coat of black would go down well :D

Link to comment
https://www.sau.com.au/forums/topic/4576-painting-my-dash/#findComment-224341
Share on other sites

Guest INASNT
Originally posted by rs73

what did you do with the film layer on the original trim, did you peel it off first?? or you just don't give a whack abt it and just slam on a thick coat of primer and sand them?

my series 2 did have any film layer.

but i sanded all the parts down anyway

Link to comment
https://www.sau.com.au/forums/topic/4576-painting-my-dash/#findComment-224453
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Dredgggggeeee time; I have recently finally started driving the car. It sat for so long that the fuel tank gave birth to rust sludge and blocked my lift pump sock and one of my walbro 460's and left grime, rust chunks and muck all through the surge tank and system. I decided to commit and pull the trigger on an oem r32 gtr fuel tank and Frenchys twin 460 / sender / surge tank hanger combo and all new larger lines and fittings etc, also boost doc heater hose kit / new heater core and a heap of other bits and shits like wideband sensor installed in the dump and Syltech iacv + lines and all wired and added to current tune. now having lightly driven it a couple times without issue, I can happily report on the hta3076 in its current tune. still no boost control switched on, 20psi gate springs, car makes 22psi at 3200rpm in 6th gear with 30-50% TPS from cruise at 100kmh. Going by the old graph, this means it should be making 300-325whp at the same numbers above. Very very responsive setup under true road driving loads. all that's left for the build is body loom + PDM, finish the remote aircon setup, install carbon fibre parts and go for full tune and 30psi. the 315 rear tyres are now performing like they're 195's, wheel spin in any gear at almost any rpm, whereas my previous setup hooked up in 3rd no issue, albeit Nt01's back then / RB25 5spd vs (new) old date r888r's Z34 6spd now, + obviously all the support upgrades I listed in the quoted post above. car sits at 1-3psi on cruise at 100kmh, expectations totally exceeded and I'm beyond stoked with all this so far. IMG_4848.mov
    • I've also been eyeing their rear axles for my car. I purchased seat mounts from them about 7 years ago and they were hot garbage so I've been a little wary about purchasing them. With that being said, please buy them and get back to us haha. 
    • Can a moderator please move this into the right category.. I've accidently put this into racing build thread 🤦🏽‍♂️
    • Being a manual, we very quickly ordered new R34 gearbox (From Nissan) and remaining parts from Kudos motorsports. Would highly recommend the team there. Ultra helpful and quick to share advice and upgrades. We are in the middle of taking the Auto out (Genuine 94,000/kms) and putting the Manual in this weekend. Part 2 of the build will include likely a Plazaman Intercooler and Plenium, Hks Exhaust with Tomei Dump (ordered).
×
×
  • Create New...