Jump to content
SAU Community

Engine Part Out Power Fc Slitfire Coils Apexi Boost Controller Z32 Ect

Rb25detvlt
 Share

Recommended Posts

Rb25detvlt Collaborator

Rb25detvlt

Posted
Posted

All parts will be available from 1st August 2015 an can be seen running an working. 1- selling as on lot power fc r33 modle, z32 afm, 850cc denso drop in injectors, 44mm turbonetics wastgate, holset hx35 turbo, pfc hand controller, ebay top mount manifold no cracks and a plumback 3 inch dump pipe to suit a vl but i think r33 run the same shape pipe. The computer is tuned for this setup on a standard rb25 engine no internal mods just a intercooler an a 3inch exhaust on e85 made 305kw on 16 pound an 280kw on 12 pound can provide dyno sheet for proof all u need to do is update ur fuel pump asking $2500 2- custom forward facing plenum started to polish it but gave up will also come with full polished standard botton half of manifold $400 3- r34 rb25 neodet head perfect working order has about 130xxx ks has never over heate or had any issues $450 4- rb25neo det bottem end has blown ringlands has abit of blowby suit rebuild $250 5- extrem ceremic brass button clutch with flywheel rated at 350kw is 8 months old an only seen about 2000ks paid 650 askin $350 6- apexi avcr boost controller full kit ive never got around to install it $200 7- splitfire coils ds001 to suit rb20 rb25s1 an rb26 only 4000ks use perfect condition i bought them new still hav there box an will also come with the coil loom which was bought new at the time i bought the injectors $450 other parts, pink sticker afm 50, r33 s1 tps 1year old $30, r33 oxygen sensor 1 year old $30, vl aluminum rb radiator $100, vl 3inch exhaust $100, r33 rb25 s1 loom modified for vl plugs into factory vl body loom an i think it needed to extra wires added for tacho an permanent power an alternator an started loom for rb25 modified for vl $200, vl mx7 gearbox suit rebuild doesn't grind but needs sycnros an has a wind $50, vl mx7 tailshaft $200 all parts located Guildford nsw but can post some parts

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • joshuaho96
      R33 GTR running -9 with no tune

      By joshuaho96 · Posted

      Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
    • GTSBoy
      NC MX5

      By GTSBoy · Posted

      Does that German restaurant still exist in the old place out the NW end of Goulburn? When I say "out the NW end of"...I am really being vague. It was 1997 when I was last there, and the only point of reference I can recall is that it was on the opposite side of the main drag from the big merino. And when I say "opposite side of the main drag", I don't mean "on the main drag". It was either a couple of streets back from there, or might have even been out in the sticks a bit further. Was an old farm building or mill or somesuch. And when I say "the big merino" I might actually be thinking of a completely different part of town, because I just looked on maps and the big bugger is not where I remembered him to be! The food was good, consisting largely of various German mystery-meat sausage/loaf things and kartofflen.
    • GTSBoy
      R33 GTR running -9 with no tune

      By GTSBoy · Posted

      So while the second sentence is completely correct and the whole point of the conversation, the first sentence bears consideration. If this bloke is just hoping to throw big turbos on and drive it around, because there are no helpful facilities at all in his tropical paradise** then he likely has zero chance of even knowing what the TP is on the last column in the stock maps, let alone know whether the ECU is operating anywhere near it or past it. So the point is very very moot. And, per what I said before, at stock boost on those turbos, you may well be off the end of the map. **I'm just back from Vanuatu, so I know exactly what small Pacific nations can be like wrt paradise without requisite facilities. But it's not even that simple. I put a high flow on my car and had to drive it around without a proper tune because of the lack of opportunity*** to put the bigger AFM and injectors into it to allow it to be tuned. I had to turn the boost down to less than I had before, and back off the boost controller's ramp, because it was exploring parts of the map that it didn't drive in before, and really couldn't access for tuning on the dyno either, and so was pinging. It was still well within the last column, because when I first**** set up the Nistune on the Neo I rescaled all axes of the maps to give some more space to explore. ***Family dyno was broken ****This was 13 years ago, and the TIM thing wasn't a thing then and so TP would definitely grow when pushing past the stock tune's limits.
×
×
  • Create New...