Jump to content
SAU Community

Defi Gauges. Bride Brix Seat. Mickey Thompson Et Street Radials.

boostn32
 Share

Recommended Posts

boostn32 Mentor

boostn32

Posted
Posted

I need to sell all these items as i no longer have my Skyline.

1. Defi 80mm white tacho brand new. $150

2. Defi 52mm Exhaust temp gauge. Brand new $280

3. Defi 60mm Exhaust temp gauge and sensor. $130

4. Defi 60mm oil pressure gauge only. $80

5. Defi 60mm boost gauge only. $80

6. Defi 60mm boost gauge complete $200

7. Defi link controllers $80 ea with power leads.

8. Mickey Thompson ET Street Radials on Enkei rims. Tyres are 255 / 50 / 16. One of the tyres has cuts in side of tread. Still good and heaps of passes left. $250

9. Bride brix seat. Outer part of seat has been recovered. small hole in bottom of seat. Genuine seat. $350.

Everything needs to go. Make an offer on multiple items. Located Upper Coomera.

post-12049-0-45434900-1439598448_thumb.jpg

post-12049-0-60186800-1439598511_thumb.jpg

post-12049-0-36691100-1439598596_thumb.jpg

post-12049-0-67322700-1439598664_thumb.jpg

post-12049-0-81001400-1439598759_thumb.jpg

post-12049-0-92139300-1439599088_thumb.jpg

boostn32 Mentor

boostn32

Posted
  • Author
Posted (edited)

Its only a very small hole. Would be smaller that a pencil. I possibly have cheap freight to sydney next weekend .

post-12049-0-34279200-1440126192_thumb.jpg

Edited by boostn32
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Squeaking clutch/throw out bearing

      By joshuaho96 · Posted

      How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • Dobz
      [Geelong,Vic] Used: pull type R33 GTR gearbox (no transfer case), Nismo super coppermix twin plate clutch

      By Dobz · Posted

      price drop $1000 gbox $400 clutch
    • sonicii
      Who has a Infiniti Q60, Q50 (V37)?

      By sonicii · Posted

      yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      Take the fall as a warning sign for future endeavours  Stay safe mate
    • Alex.LA
      R34 GTR Vspec Garage Sale - All must go!

      By Alex.LA · Posted

      hi mate, HKS cooler piping still available by any chance?
×
×
  • Create New...