Jump to content
SAU Community

Happy Laps Lakeside Park - 11/10/2015


Recommended Posts

Event:

Happy Laps - Lakeside Park


Description:

A chance to get out on track for a fun cruise and have some om nom noms! Bit of spirited driving is allowed but it is still an event on a race track so a few rules need to be followed (see below). Breakfast will be served with bacon, eggs, beans and toast.


Location:

Lakeside Park



Date:

Sunday the 11th of October


Time:

7:00 AM Arrival

7:30 AM Breakfast

8:00 AM On Track


Cost:


$35 for members

$50 for non members



Please note that this is a per person cost, any passengers are required to pay as well.

If you wish to come along to watch and not have breakfast it is free.


Requirements:

1. Participants must meet minimum age requirements for being on track.

2. The overtaking car is responsible for completing the overtaking move safely.

3. Overtaking is only permitted on straights, unless clearly waved passed by the car in front.

4. Overtaking move must be completed well before the end of the straight, and the car being overtaken must be given plenty of room.

5. Cars should not be more than 2 abreast at any point on the track.

6. Be aware of cars around you, in front and behind (and beside when being overtaken).

7. Do not assume that the car in front of you knows you are there.

8. Please pay cash on the day, no EFTPOS is available.


Lakeside Specific Rules:

10. Participants must have completed at least ONE QR Happy Laps before participating in a Lakeside session. (If you have done other Lakeside events before you may be eligible. PM me to clarify)

11. No overtaking or cars side by side on the kink.


Payment Details:


Name: Skylines Australia Queensland Club

Bank: Westpac

BSB: 034 063

ACC: 354012


PAYMENT REFERENCE: Username&HappyLaps


Attendees:

  1. Cadmoon +1
Link to comment
https://www.sau.com.au/forums/topic/459471-happy-laps-lakeside-park-11102015/
Share on other sites

  • 2 weeks later...

Hi Mike,just transferred $135.

$35 for myself in v35 skyline and $100 for Marty and Donna (non members) in a mx5.

They did a QR Happy laps last year with us and so have qualified to do Lakeside.

  • Like 1

Yes was a good morning guys - thanks heaps.

Sorry I had to bail early - ran out of gas, and had to take the father-in-law home.

Happy with the snot-rocket - was it's first time on track so I was just getting a feel for it. Doesn't go too badly for stock.

Some of you other guys were really hauling ass out there!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The attached document is fine. I just downloaded & opened it.
    • Hello, sorry for being late to join the discussion, but my clock just died on me.   Ive tried to look at Michaels digital clock repair.docx and it doesnt work maybe the file has expired.   Please let me know if you can re upload it or take some youtube videos to show us how to get the clock installed? thanks
    • I thought that might be the case, thats what I'll start saving for. Thanks for the info 
    • Ps i found the below forum and it seems to be the same scenario Im dealing with. Going to check my ECU coolant temp wire tomorrow    From NICOclub forum: s1 RB25det flooding at start up Thu Apr 11, 2013 7:23 am I am completely lost on this. Car ran perfectly fine when I parked it at the end of the year. I took the engine out and painted the engine bay, and put a fuel cell with an inline walbro 255 instead of the in tank unit I had last year. After reinstalling everything, the engine floods when the fuel pump primes. if i pull the fuel pump fuse it'll start, and as soon as I put the fuse back in it starts running ridiculously rich. I checked the tps voltage, and its fine. Cleaned the maf as it had some dust from sitting on a shelf all winter, fuel pressure is correct while running, but wont fire until there is less than 5psi in the lines. The fuel lines are run correctly. I have found a few threads with the same problem but no actual explanation of what fixed it, the threads just ended. Any help would be appreciated. Rb25det s1 walbro255 fuel pump nismo fpr holset hx35 turbo fmic 3" exhaust freddy intake manifold q45tb q45 maf   Re: s1 RB25det flooding at start up Fri Apr 12, 2013 5:07 am No, I didn't. I found the problem though. There was a break in one of the ecu coolant temp sensor wires. Once it was repaired it fired right up with no problems. I would have never thought a non working coolant temp sensor would have caused such an issue.
    • Hi sorry late reply I didnt get a chance to take any pics (my mechanics on the other side of the city) but the plugs were fouled from being too rich. I noticed the MAF wasn't genuine, so I replaced it with a genuine green label unit. I also swapped in a different ignitor, but the issue remains. I've narrowed it down a bit now: - If I unplug and reconnect the fuel lines and install fresh spark plugs, the car starts right up and runs perfectly. Took it around the block with no issues - As soon as I shut it off and try to restart, it won't start again - Fuel pressure while cranking is steady around 40 psi, injectors have good spray, return line is clear, and the FPR vacuum is working. It just seems like it's getting flooded after the first start I unplugged coolant sensors to see if its related to ECU flooding but that didnt make a difference. Im thinking its related to this because this issue only started happening after fixing coolant leaks and replacing the bottom part of the stock manifolds coolant pipe. My mechanic took off the inlet to get to get to do these repairs. My mechanics actually just an old mate who's retired now so ill be taking it to a different mechanic who i know has exp with RBs to see if they find anything. If you have any ideas please send em lll give it a try. Ive tried other things like swapping the injectors, fuel rail, different fuel pressure regs, different ignitor, spark plugs, comp test and MAF but the same issue persists.
×
×
  • Create New...