Jump to content
SAU Community

500hp R34 Gt-t ?!

OMRAN
 Share

Recommended Posts

Sydneykid Grand Master

Sydneykid

Posted
Posted

Hi Omran got your PM. In my opinion 500 bhp is past the limit for standard internals, ~450 bhp is a far as I would go. If that is Ok, then this is what we did on our R34 GTT which makes 265 rwkw....

* Power FC with Boost Control Kit & Commander (20 rwkw) $1100

* Split dump with mandrel 3.5" exhaust & hi flow cat (25 rwkw) $900

* GCG ball bearing hi flow RB25DET turbo (20 rwkw) $1600

* Tomei 500 cc injectors (0 rwkw) $900

* Tomei 260 Poncams (15 rwkw) $1400

* Z32 AFM (0 rwkw) $200

* Pipercross panel filter in the standard airbox (5 rwkw)$100

* Upgrade the ambient air feed (on a hot day 20 rwkw) $12

* Standard R33/34 GTR intercooler (20 rwkw) $600

* 63 mm pipework from the turbo to the intercooler (goes with I/C) $150

* 75 mm pipework from the intercooler to the throttle body (goes with I/C) $200

* 85 mm aluminium pipework with silicone pie adaptors from the turbo to the AFM (the standard rubber kept getting sucked closed) $80

* OS Giken twin plate clutch (O rwkw) $1700

* Electric fan (remove the standard fan) (4 rwkw) $100

Total ~$9K plus labour (say 4 days at $60 per hour) and tuning (say $500).

Total ~$11.5K (Australian dollars of course)

You will notice it does not have a thick head gasket, I personally don't believe in them at all and at that power level are not necessary anyway. You will also notice no adj cmashaft pulleys. The Tomei cams have so far proved to be prefectly timed standard, so don't waste your money. Being a hi flow of your standard turbo, all the water, oil and air pipework will fit back up as per standard.

Hope that helps, if you really want 500 bhp then let me know as you need quite a different spec plus a bit of internal work. :D

Mazinger Enthusiast

Mazinger

Posted
Posted

JiMiH: man you wouldnt want to live here, its too hot these days and the heat kills turbo engines......Skylines included.

OMRAN: nice ride you have there, i think i saw it for sale a while ago for 100k DHS, looks great .

anyway i dont care what turbo you are trying to use, but make sure that the engine is well cooled before you start anything, trust me those big turbos get HOT.

I've heard of people busting RB26's only because of the heat issue.

too bad about that RHD law though, i was hoping that i'd get something RHD soon, but it seems like my dreams have evaporated. is this applicable for all the emirates? even UAQ. man i'd really like to get something good outta japan. Any idea why the law's been calcelled?

sorry too many questions. in the meantime enjoy your ride.

OMRAN Collaborator

OMRAN

Posted
  • Author
Posted

Sydneykid ...

thanx alot for replyin ...

that was really helpfull ...

mm i was thinking of 500 hp .. but if it really need some internal changes ... i dont think i will go for that ...

450 .. << not bad at all ...

have u seen the HPI project car .. they did 294rwkw dot know what mod. have been done .. i only saw the big turbo ..mainfold .. wastgate .. thats all what i'v seen ..

any way ..

about the turbo ... * GCG ball bearing hi flow RB25DET turbo (20 rwkw) $1600

where do i get those from .. ?? only AUS ... right .. ??

..

are they good .. i mean as i said befor .. daily use car ... would that turbo take it ...

and all other mods .. would it be ok .... dont need alot of problems ..

and thanx again mate .. that was really great ...

now i have a shopping list ...

i'll get all the stuff .. then i'll start working on the car .. :)

more help would be good .. thanxx .. again

OMRAN Collaborator

OMRAN

Posted
  • Author
Posted
JiMiH: man you wouldnt want to live here, its too hot these days and the heat kills turbo engines......Skylines included.

OMRAN: nice ride you have there, i think i saw it for sale a while ago for 100k DHS, looks great .

anyway i dont care what turbo you are trying to use, but make sure that the engine is well cooled before you start anything, trust me those big turbos get HOT.

I've heard of people busting RB26's only because of the heat issue.

too bad about that RHD law though, i was hoping that i'd get something RHD soon, but it seems like my dreams have evaporated. is this applicable for all the emirates? even UAQ. man i'd really like to get something good outta japan. Any idea why the law's been calcelled?

sorry too many questions. in the meantime enjoy your ride.

thanxx man ... nice to see some one from uae .. :) ..

mm ..yeah it was on the net .. while ago ... . but i'v taken it much much less then that ..

engine is well cooled ... thanx god the car is in a very good condetion .. 65c thermostat will be fit soon ...

about the RHD ... 100% sure ... all the emirates .. UAQ .. was registering ... ( shaikh saif bin zayed personaly forced them to stop ) ..

and one more thing ... 3 days ago .. they told me that no more skyline RHD nor LHD will ever registered in UAE ... ( not sure yet ) .. that would be really bad ... but some how good ... coz most new drivers (kids) buy skylines (cheap ..mostly r32) .. and make alot of troubles ..

i'll make sure about that ...and i'll let u know ..

Revhead Grand Master

Revhead

Posted
Posted
You could go to One of the workshops in Dubai and the could custom build a maifold for your car, they will also fit the intercooler and the fuel system for your car, I have tried them they are ok, they did my Nissan Patrol Turbo and intercooler ,they fit it with a Greddy 78 turbo and i was running 2 bar 800 rwd hp, I guess you will know me Omran Since i mentioned my car, fellows from austrailia

(its a NissanPatrol 2003 4x4 4.8l vtec) Fully Modified Stroker Engine One of many 4x4's that are custom made in the UAE. :flamed:

Do you have any more info/pics/vids of this Patrol?? Sounds like a beast :)
Mazinger Enthusiast

Mazinger

Posted
Posted

Forgot to say this but the only turbo that seems to be popular around here is the Trust T-88 (they call it greddy here...how pitiful)

reason is most cars that come already modified (japan or thailand) have this turbo. and its cheap (for the power) and not very difficult to repair . i dont think its a very good turbo given the spool up time necessary. i think a single 3037s will suit your application, but then again i could be wrong.

remember if you take care of your turbo it will last a long time, regardless of what everyone say. (unless you get that t51z<<

OMRAN Collaborator

OMRAN

Posted
  • Author
Posted
Forgot to say this but the only turbo that seems to be popular around here is the Trust T-88 (they call it greddy here...how pitiful)

reason is most cars that come already modified (japan or thailand) have this turbo. and its cheap (for the power) and not very difficult to repair . i dont think its a very good turbo given the spool up time necessary. i think a single 3037s will suit your application, but then again i could be wrong.

remember if you take care of your turbo it will last a long time, regardless of what everyone say. (unless you get that t51z<<

loool .... cant agree more :wassup:

alot of guys here dont really know how to mod. there skyline ..

... thanxx for the help mate ....

OMRAN Collaborator

OMRAN

Posted
  • Author
Posted
You will notice it does not have a thick head gasket, I personally don't believe in them at all and at that power level are not necessary anyway.  You will also notice no adj cmashaft pulleys.  The Tomei cams have so far proved to be prefectly timed standard, so don't waste your money.  Being a hi flow of your standard turbo, all the water, oil and air pipework will fit back up as per standard.

Hope that helps, if you really want 500 bhp then let me know as you need quite a different spec plus a bit of internal work. :)

i dont like thick gasket too .... but if more power needed with more boost .. i think its a must ...

any way ... i'd like to have some info about the 500hp ..

what other spec's do i need ... for the 500 thing

thanx for the help bro ...

  • 6 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Murray_Calavera
      WTAC 2025

      By Murray_Calavera · Posted

      Yeah mate, never miss it.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Any going to watch World Time Attack at SMSP this year?
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
    • zillah
      Recommendation for engine oil funnel spill free

      By zillah · Posted

      hahaha good on
×
×
  • Create New...