Jump to content
SAU Community

Recommended Posts

Hi so mods are:

R33 GTST

Pod Filter

JJR Return Flow FMIC

JJR Front dump

High flow cat

Cat Back

Power FC

9-10 PSI

Problem, a few months ago i started to notice, randomly, after usual warm up in the morning and driving to work just going into positive pressure(light throttle) there would be a whine, back off and do it again and it would whine again. Then back off and go again and it would be fine, no weird sound. When upto op temp I would boost like normal and everything was fine. It then stopped doing it in the mornings.

More recently(for a month i guess) its now doing it anytime I'm hitting boost above 4-5psi. But still hits boost.

I have a feeling its too loud to be some sort of boost leak... but still... I looked for leaks, loose clamps and it seemed fine, but where the throttle body meets the intake plenum there was what I thought was a fair bit of black stuff(carbon?) cleaned it off, drove it for a while, still hitting boost, but very rarely and it was back, cleaned it again and for this past week or two havent seen anything, BUT I havent been boosting, or only a touch of boost. I sprayed it with carby cleaner at idle but nothing changed, I might change the gasket anyway just incase.

Before noticing the throttle body though, I did check for shaft play, taking off the intake pipe. It has little, to none side to side, up and down. BUT it has 3+mm In and Out(back to front of car) no oil, but if I tried to spin it. it wouldnt rotate much, possibly a quarter turn...(stock turbo)

So I am about to go see a mechanic and have a chat.

But after a bit of googling today im thinking the turbo isnt getting oil and its about to blow.

Also at idle I cant see any smoke from the exhaust other than what I feel is normal when cold started in the morning

Link to comment
https://www.sau.com.au/forums/topic/459791-turbo-near-death/
Share on other sites

well i talked to a mechanic and from what i described he said do not drive it anymore....

so its now parked in my garage till i can figure out what turbo and other parts im gonna need to get it going again... doing lots of reading on turbo options atm

hopefully its just the turbo and engine is still ok

I'd talk to Hypergear Stao has a good rep with some top turbo's. I sort wish I'd used him but I got mine a bit earlier.....as he was coming onto the market. Or he could hi flow yours for a less than a new one.

Yeah I've been considering hypergear for a while now. Have been looking at the 43ss2. But I'm gonna talk with my tuner about a few things. Tossing up with keeping the power fc and buy an ebc, and z32 or upgrade to a haltech while I'm at it,

Also working out what injectors to go with

Man I've had that exact same "issue" maybe for the past 5...years? I hope that helps you not to make any rash decisions over a little noise like that which could be perfectly normal. When I first heard it I thought the same thing as you, turbo whine, its on its way out, started looking for options to change the turbo, better do it before it blows and maybe takes the engine with it I thought! What a great excuse for an upgrade!

When you hear the noise you can keep it going as long as you keep the throttle the same, then as soon as you press more or less it goes away right? IF the turbo was dying it would whine non stop.

If the car is running good and you are happy with it just drive it, in fact boost it as much as you want up to the normal recommended amount for your setup and don't worry. Your turbo could be better than you think. If it does blow chances are it wont get past the inter-cooler and you can replace it then. But I think you will find the turbo will outlast your grankids. The R33s turbos are tough.

I am not saying in your case your turbo is fine, but I am 99.9999% sure its not what you are imagining it to be. In my case it was just being overly concerned as it it has been nothing.

Have you tried disconnecting the speakers and radio to see if the noise is not interference from the speakers? I mean really physically disconnect the cables.

Sound is definitely from the the engine bay,

Once the sound starts if I back off sounds gone, if I use more throttle it continues, also there's a fair chunk of shaft play, does yours?

Also if the turbo starts getting side to side shaft play and files away at the compressor side I don't think the intercooler is going to stop that.

Thanks for your input I'm not rushing to get it going again, I just think regardless it's something I had been planning to do this year, early next anyway and I never felt comfortable hearing the sound, so if I left it I wouldn't be going near it,anyway

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Guys since i bought r33 gts25t coupe 1994 automatic a/t(manual swap 350z gearbox)  all i got is problems, always problems. Lets start with that when i turn key into ignition(ON) fuel pump doesnt always works. Sometimes i have to turn key twice Off/on/off/on until it primes. Its new, dw300 - 340lph. My gearbox broke so i did gearbox swap, install different intake manifold, injectors and i take pipes. Car was sitting in garage for more than half a year. I did assembly all not that long ago and when i turn ignition cant hear prime. All of sudden it stopped working. Theres many videos on YouTube how to make relay mod on r33 straight from battery so i did and it doesnt work! 😰 30 - battery positive  87 - positive from fuel pump to relay 85, 86 - one of two wires from original fuel pump wires(light blue, grey) and it didn’t work. so I check on ignition and took original BLUE relays wires from trunk, next to fuses. (I believe it’s IGN+ and ECU pin 18. it didn’t work…  tried connecting (IGN+ from og relay) and (ECU 104 from 1of4 FPCM wires) to my new relay 85/86 and it didn’t work.  I unplug FPCM. Didn’t work. im thinking what’s wrong   fuel pump is working, if I leave IGN+ on 85 and 86 straight to ground it works but it’s just nonstop. Since it getting constant 12v after key in ON. light blue wire gives me 6-8v.  so how this should be connected? What causing ECU not giving — on pin? Or I did sth wrong and that’s why it doesn’t work? I need negative signal on ECU that control fuel pump. What this should be?
    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
×
×
  • Create New...