Jump to content
SAU Community

Recommended Posts

Selling my twin setup.

Engine always maintained, oil and filter change every 5000km with Penrite 15W50 diesel, so turbo bearings perfectly clean. Street driven, daily driver with the monthly mountain runs. Never tracked and oil temperature always sat at about 75 degrees never exceeded 90 degrees.

Ran the turbos at 26 psi for a short time but at 23psi for 95% of their lives.

Setup was designed to maximise response with free flowing dumps and front pipe.

Done about 60000 kms

Location: Melbourne

Prices: Negotiable, sensible offers will be considered

Contact me via pm.

Thanks.

TURBOS

2 x Garrett 2860 -5

Heavy duty actuators

Perfect condition

No shaft play.

The rear was rebuilt at 30000km due to oil line issue.

Price: $1500

post-89815-14436658631191_thumb.jpg

post-89815-14436640831646_thumb.jpg

post-89815-14436641119396_thumb.jpg

post-89815-14436641316718_thumb.jpg

post-89815-14436641582191_thumb.jpg

TOMEI DUMP PIPES

Old style with larger diameter 73mm compared to the newer 68mm from memory.

Highly sort after.

Flanges and welds in perfect condition

Price: $600

post-89815-14436644723458_thumb.jpg

post-89815-14436644833699_thumb.jpg

FRONT PIPE

Very well made mild steel front pipe

Custom 3.5 inch collector with 3 bolt flange. A bung is on the collector to run a Bosch wideband O2 sensor. Modifications were made to assist response and eliminate the 3 inch restriction on most other front pipes. Will bolt straight to factory position but you will need to weld a 3 bolt flange to your cat back.

I have heat wrap on them at the moment but quite happy to take it off and spray them black for the buyer.

Price: $500

post-89815-1443665772219_thumb.jpg

post-89815-14436657959711_thumb.jpg

post-89815-14436658094732_thumb.jpg

Edited by XGTRX
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
    • Yeah, I guess its pretty easy to get to if this doesn't work. Just wait till next oil change and pull it out. I am going to have to do the oil pan gasket soon and thought I'd just replace it while I was there.  Thanks
    • All that matters is you're safe and you were able to type that post. Hopefully heaps of parts you can recover for the next shell.  
×
×
  • Create New...