Jump to content
SAU Community

Recommended Posts


Removed due to upgrade/replacement. Haven't fully separated/cleaned things up yet. Can take more pics as needed.






Complete hot side, manifolds to muffler including.



- Tomei Expreme Stainless Manifolds - $800



- R34 Stock manifolds - $100



- Stock manifold shields - $20



- R34 BB Turbos with drains and actuators (80ks on these, some shaft play, can take video/open to inspection) - $250



- Tomei stainless dumps (v-spec compatible with EGT port). $600



- 2.5" into 3" front pipe, with flex pipe. $200



- 3" mid pipe with flanged stock Nissan cat and basic mid muffler into 3.5" rear pipe/muffler section with cannon. Can only see a Jasma label on it - SR. - $600






Or take the lot/most as a complete system and make me an offer.






R34 PowerFC LJetro with hand controller (with tune for stock injectors/turbos) $800



R34 Standard fuel pump. $50



R34 AFMs $100



Standard mirrors in KR4, plug removed. $100



Standard Cam Gears. $20



Twin turbo pipe. $100



Rays vinyl wheel stickers, full set. - $30






I can assist with fairly cheap postage or pickup is fine.






Located in Wodonga.









post-23873-0-59937600-1456029424_thumb.jpg

post-23873-0-34867400-1456029434_thumb.jpg

post-23873-0-29971800-1456029445_thumb.jpg

post-23873-0-78235800-1456029457_thumb.jpg

post-23873-0-64477500-1456029471_thumb.jpg

post-23873-0-94053800-1456029550_thumb.jpg

post-23873-0-80974800-1456029632_thumb.jpg

post-23873-0-78692600-1456029652_thumb.jpg

  • 2 weeks later...
  • 2 weeks later...

Price drops, buy buy buy.

Removed due to upgrade/replacement. Haven't fully separated/cleaned things up yet. Can take more pics as needed.
Complete hot side, manifolds to muffler including.
- Tomei Expreme Stainless Manifolds - $500
- RB26 Stock manifolds - $80
- Stock manifold shields - $20
- R34 BB Turbos with drains and actuators (80ks on these, some shaft play, can take video/open to inspection) - $SOLD
- Tomei V1 stainless dumps (v-spec compatible with EGT port). $500
- 2.5" into 3" front pipe, with flex pipe. $180
- 3" mid pipe with flanged stock Nissan cat and basic mid muffler into 3.5" rear pipe/muffler section with cannon. Can only see a Jasma label on it - SR. Came of 34, but will fit 33 with minimal mods - $500
Or take the lot/most as a complete system and make me an offer.
R34 PowerFC LJetro with hand controller (with tune for stock injectors/turbos) $700
HKS EVC6 - $400
R34 Standard fuel pump. $50
R34 AFMs $100
Standard Cam Gears. $20
Twin turbo pipe. $80
Rays vinyl wheel stickers, full set. - $30

You know you want to throw me some offers and buy lots of this stuff at once and get a deal.

As much as I want to clear up space in my shed and put some money back in the bank :D

  • 2 weeks later...
  • 1 month later...

Only stock bits and the cat back and front pipe left now.

RB26 Stock manifolds - $80
Stock manifold shields - $20
2.5" into 3" front pipe, with flex pipe. $180
3" mid pipe with flanged stock Nissan cat and basic mid muffler into 3.5" rear pipe/muffler section with cannon. Can only see a Jasma label on it - SR. Came of 34, but will fit 33 with minimal mods - $500
R34 Standard fuel pump. $50
R34 AFMs $100
Standard Cam Gears. $20
Twin turbo pipe. $80
Rays vinyl wheel stickers, full set. - $30

Stuff will go cheap, just want to clear up space.
Also have plenty of S13 stock bits left over also.
  • 2 weeks later...
Price drop, list update.



R34/RB26

- RB26 Stock manifolds - $60

- Stock manifold shields - $10

- 2.5" into 3" front pipe, with flex pipe. $150

- 3" mid pipe with flanged stock Nissan cat and basic mid muffler into 3.5" rear pipe/muffler section with cannon. Can only see a Jasma label on it - SR. Came of 34, but will fit 33 with minimal mods - $400

R34 Standard fuel pump. $50

R34 AFMs $100

Standard Cam Gears. $20

R34 Non Vspec air guides for brakes. $300

R34 GTT Console ilid skin, mint condition. Hinge and leg no good though. $100


S13

- S13 CA18 Viscous Centre and 6 bolt shafts - dunno what these are worth$$

- GKTech V3 S13 to s14 toe arm adapters (use S13 arms in s14 subframe). $Not sure either

- Carpet

- Roof lining,

- Lots of interior plastics

- Interior light

- CA18 Cam Gears

- CA18 Intake Cam

- CA18 AFM and plug.

- a TPS

- Washer fluid bottle and neck

- Standard space saver.

- CA18 carbon canister

- Rear toe arms

- Rear camber arms

- Coil pack cover

- Leaking power steering rack that includes the rack ends (the rack ends might be S15 ones as I used an S15 rack and some bits from the S13 rack ends/tie rods.


I can assist with fairly cheap postage or pickup is fine.


Or take a bulk lot for cheaper.


Located in Wodonga.

post-23873-0-36202400-1466314948_thumb.jpg

post-23873-0-66104800-1466314949_thumb.jpg

post-23873-0-37654200-1466314952_thumb.jpg

post-23873-0-59860600-1466314955_thumb.jpg

post-23873-0-06954500-1466314957_thumb.jpg

post-23873-0-47503500-1466314958_thumb.jpg

post-23873-0-37883700-1466314959_thumb.jpg

post-23873-0-16605000-1466314960_thumb.jpg

post-23873-0-99280200-1466314970_thumb.jpg

post-23873-0-52952300-1466314972_thumb.jpg

  • 4 weeks later...
  • 1 month later...

Bump, make some offers, need the shed space :)

 

34/RB26

 

- RB26 Stock manifolds - $60
- Stock manifold shields - $10
- 3" mid pipe with flanged stock Nissan cat and basic mid muffler into 3.5" rear pipe/muffler section with cannon. Can only see a Jasma label on it - SR. Came of 34, but will fit 33 with minimal mods - $400
R34 Standard fuel pump. $50
R34 AFMs $100
Standard Cam Gears. $20
R34 Non Vspec air guides for brakes. $300
R34 GTT Console ilid skin, mint condition. Hinge and leg no good though. $100

 

S13
- S13 CA18 Viscous Centre and 6 bolt shafts - dunno what these are worth$$
- Carpet
- Roof lining,
- Interior light
- CA18 Cam Gears
- CA18 Intake Cam
- CA18 AFM and plug.
- a TPS
- Washer fluid bottle and neck
- Standard space saver.
- CA18 carbon canister
- Rear toe arms
- Rear camber arms
- Leaking power steering rack that includes the rack ends (the rack ends might be S15 ones as I used an S15 rack and some bits from the S13 rack ends/tie rods.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...