Jump to content
SAU Community

Recommended Posts

G'day guys.

The LED has blown in my ECU, have another ECU to replace the LED with but wondering if anyone knows the voltage that goes to the LED as I have a 12V led and was going to piggy back off the existing setup to then remote mount it.

Also, anyone in Brisbane good with a soldering iron to change out the LED's for me, beer economy.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/463849-ecu-led-voltage/
Share on other sites

Why is it a special LED? Is it not just a regular 5mm moulded acrylic LED? If its red they have a forward voltage around 1.8V. Billions of them in the world, no need to hack up existing parts.

If I understand right, you want to use an actual manufactured LED bulb? The only LEDs with forward voltages of 12v are big 10w + LED chips used in floodlights.

If so, I doubt you would be able to power it from the circuit directly. If it only powered a small LED, thats around 10mA. Also without knowing what circuitry powers the LED (eg constant current driver) drawing too much current could destroy an irreplaceable chip.

Link to comment
https://www.sau.com.au/forums/topic/463849-ecu-led-voltage/#findComment-7702627
Share on other sites

Why is it a special LED? Is it not just a regular 5mm moulded acrylic LED? If its red they have a forward voltage around 1.8V. Billions of them in the world, no need to hack up existing parts.

If I understand right, you want to use an actual manufactured LED bulb? The only LEDs with forward voltages of 12v are big 10w + LED chips used in floodlights.

If so, I doubt you would be able to power it from the circuit directly. If it only powered a small LED, thats around 10mA. Also without knowing what circuitry powers the LED (eg constant current driver) drawing too much current could destroy an irreplaceable chip.

Thanks for the reply. I've got little 12V led's that come from jaycar.. must have circuitry in it to make it 12V.

http://www.jaycar.com.au/Active-Components/Optoelectronics/LED-Modules/12V-Mini-Chrome-Bezel---Red/p/SL2644

i'll scrap the idea of running a remote one off it then.

any chance you're in Brisbane?

Edited by monzo
Link to comment
https://www.sau.com.au/forums/topic/463849-ecu-led-voltage/#findComment-7702633
Share on other sites

Lol I am a bit far south. But you could learn a lot by measuring with a multimeter. You could try desoldering the current LED and probing the voltage for starters (but you would also need to check it while powering an LED too). It sounds like you don't have any electronic tools like a soldering iron, but its a worthwhile skill to invest in.

Also keep in mind: do you know for sure the LED is blown? The LED may be a red herring and some other part of the circuit is non functional.

Link to comment
https://www.sau.com.au/forums/topic/463849-ecu-led-voltage/#findComment-7702676
Share on other sites

Lol I am a bit far south. But you could learn a lot by measuring with a multimeter. You could try desoldering the current LED and probing the voltage for starters (but you would also need to check it while powering an LED too). It sounds like you don't have any electronic tools like a soldering iron, but its a worthwhile skill to invest in.

Also keep in mind: do you know for sure the LED is blown? The LED may be a red herring and some other part of the circuit is non functional.

Hope it's just the LED. The ECU does work fine in all aspects just no functioning LED. I'll test the voltage tomorrow before I head to Jaycar to make sure it's a blown LED and have the voltage required then as well. Was hoping someone might have the voltage it is to avoid this.

I can solder wires together but when it comes to desoldering/resoldering circuit boards i'd prefer to leave it to someone who has done heaps of them before as I don't want to wreck the ECU I have.

Link to comment
https://www.sau.com.au/forums/topic/463849-ecu-led-voltage/#findComment-7702689
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...