Jump to content
SAU Community

EOI- Autospeed DIY Boost Control Kit

Bass Junky

By Bass Junky,
in Group Buys

 Share

Recommended Posts

R33vit Experienced

R33vit

Posted
Posted
Im not convinced. As soon as a boot it ive got full boost, so how does this give me boost quicker??

Maybe on the tested Audi, they had some inbuilt delayed boost in the computer?

Robo's

I use this boost controller and it does seem like boost comes on quicker but what it does with the use of the second valve stops wastegate creep. Like all bleed valves they to suffer in the higher gear. Boost drops a little in 4th. You could get it out but takes a lot of road testing and draws a sh1t load of attention to your self

Bass Junky Grand Master

Bass Junky

Posted
  • Author
Posted

Components.

Well the components just arrived.

Here's a pic to show you them.

The fitting aren't what I expected but will do the job. They are all stainless steel, and I might change them over to normal ones, as the barbs aren't part of the elboxs and Ts but actually screw in. this meants more components and makes the whole set up quite large.

I'll build my one this weekend and gauge the results and source some more appropriate fittings next week.

Trust33 Grand Master

Trust33

Posted
Posted

hey bass junky.Encase the link so you can actually push and go.Ill show you how to do it.

Written like this but without the spaces:

Bass Junkys Boost controllers [ url/ ]

Looks like this

Bass Junkys Boost controllers[url/]

Your link is soived....;)

Trust33 Grand Master

Trust33

Posted
Posted
Components.

Well the components just arrived.

Here's a pic to show you them.

The fitting aren't what I expected but will do the job.  They are all stainless steel, and I might change them over to normal ones, as the barbs aren't part of the elboxs and Ts but actually screw in.  this meants more components and makes the whole set up quite large.

I'll build my one this weekend and gauge the results and source some more appropriate fittings next week.

Hey bass junky.Encase the link so you can actually push and go.Ill show you how to do it.

Written like this but without the spaces:

Bass Junkys Boost controllers [ url/ ]

Looks like this

Bass Junkys Boost controllers

Your link is soived....;)

Trust33 Grand Master

Trust33

Posted
Posted
Components.

Well the components just arrived.

Here's a pic to show you them.

The fitting aren't what I expected but will do the job.  They are all stainless steel, and I might change them over to normal ones, as the barbs aren't part of the elboxs and Ts but actually screw in.  this meants more components and makes the whole set up quite large.

I'll build my one this weekend and gauge the results and source some more appropriate fittings next week.

Hey bass junky.Encase the link so you can actually push and go.Ill show you how to do it.

Written like this but without the spaces:

Bass Junkys Boost controllers [ /url ]

Looks like this

Bass Junkys Boost controllers

Your link is soived....;)

Trust33 Grand Master

Trust33

Posted
Posted
Components.

Well the components just arrived.

Here's a pic to show you them.

The fitting aren't what I expected but will do the job.  They are all stainless steel, and I might change them over to normal ones, as the barbs aren't part of the elboxs and Ts but actually screw in.  this meants more components and makes the whole set up quite large.

I'll build my one this weekend and gauge the results and source some more appropriate fittings next week.

Hey bass junky.Encase the link so you can actually push and go.Ill show you how to do it.

Written like this but without the spaces:

Bass Junkys Boost controllers [ /url ]

Looks like this

Bass Junkys Boost controllers

Your link is soived....;)

Hope you have luck with selling the boost controllers:)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • nouveau_poor
      Unknown sound similar to BOV on positive boost with partial throttle RB26

      By nouveau_poor · Posted

      Hi everyone, I've been wrestling with this for a while now and have been trying to find out the cause. For context, the turbos used are Garrett 2860 -5s, the BOV is a BNR32 HKS SSQV IV kit, the car is currently tuned to ~470 whp on 17.5 psi. The car drives normally, pulls well when it doesn't happen, and I can replicate it fairly easily. It does not sound like turbo shuffle or flutter. The engine has only a thousand or so miles and has had this behavior since it was completed. After my engine was built for my R32 GTR, I noticed that the car now sometimes makes an air discharge sound on what appears to be positive boost pressure that sounds really similar to a BOV. I had thought that it was a BOV issue but even when replacing it with a brand new unit, the sound persisted. It seems like it's coming from the passenger side but I may be mistaken. The closest scenario I could find was this post here https://www.gtr.co.uk/threads/maybe-a-boost-leak-opinions.147955/https://www.gtr.co.uk/threads/maybe-a-boost-leak-opinions.147955/ started by @yakshii and it sounds very similar. As in, at partial throttle once I reach positive boost I begin to hear the same psh psh psh psh psh sound like air is leaking somewhere when I keep the throttle in the same position. It most commonly happens in 4th gear at around 3-3.5k RPM and 5th gear around 2.5-3k RPM, which seems to coincide with normal positive boost thresholds. It might be similar to what @Austrian GTR mentioned about his own HKS SSQV. Notable difference would be that when he applies more throttle when it happens, it stops. In my scenario if I apply more throttle during this repeated psh psh psh sound, the cadence of the sound gets faster and louder rather than stopping. If I lift off slightly and apply throttle again, it will normally stop and pull without issue. I've checked all rubber couplers to ensure that they are tight, but have not gotten the opportunity to properly do a pressurized boost leak test. If anyone has had similar experiences or thoughts on what might be the cause, I'd be very keen to hear them. I also have a video of it happening from inside the cabin, if that would make it easier to understand: https://youtu.be/2zqZXcx8jbA
    • Dose Pipe Sutututu
      Living With An R33 Gtst

      By Dose Pipe Sutututu · Posted

      wow that escalated quick.
    • tridentt150v
      Valuation of r33 gtst 1998 40th anniversary

      By tridentt150v · Posted

      I'd want at least $40K for mine, but thats easy to say cos I'm not selling anyway.
    • TurboTapin
      Leaking Rear Subframe Bushing?

      By TurboTapin · Posted

      That's incorrect. We have 4 seasons, consisting of pre winter, winter, post winter and a small glimpse of hope! 
    • Duncan
      spot the stagea

      By Duncan · Posted

      I spotted a black C34 in Mittagong this morning!
×
×
  • Create New...