How to install oil pressure gauge

[BLUEGTR]

Gday just wondering how i install a oil pressure gauge on my r32 gtr. I have a remote oil filter so i not sure if that changes anything. Also how do I get through the firewall

Thanks

Matt

[Evo_Lee]

doesn't matter, all depends on where you can fix the sensor or where you wish to monitor the oil...

what kind of oil pressure guage have you got electric?

[BLUEGTR]

doesn't matter, all depends on where you can fix the sensor or where you wish to monitor the oil...

what kind of oil pressure guage have you got electric?

Nah its mechnical. Were do I put the sensor????

[PHATR32]

well on my other car i plugged a "T" piece in place of the OEM sensor, then plugged both the oem sensor and oil gauge sensor onto the "T" piece.

steve

[Dahtone Racing]

there are numerous grommets in the firewall which you can run your line through just pick one thats close to where your mounting the gauge and make sure you can find it from inside the car aswell.

as for the sensor use PHATR32's method.

[OREX]

my remote filter has a barbed fitting plugged up when you buy it. all i did was take the barbed plug out and screw in an autometer brass attatchment which fit 100%, and there was already a rubber grommet near the brake master and near the inlet plenum. if that doesn't apply to your filter then try PHATR32's method.

[BLUEGTR]

my remote filter has a barbed fitting plugged up when you buy it. all i did was take the barbed plug out and screw in an autometer brass attatchment which fit 100%, and there was already a rubber grommet near the brake master and near the inlet plenum. if that doesn't apply to your filter then try PHATR32's method.

Were abts is the oem sensor on the rb26???