Jump to content
SAU Community

33R

Lethal26
 Share

Recommended Posts

Lethal26 Contributor

Lethal26

Posted
Posted

Hey everyone!!

As you all know once you buy a GTR you will end up broke but that's the fun of it hehe ;)

Well it's a 33 gtr, just recently the hg let go after getting it tuned!! All the car had is a full exhaust and adaptronic ecu. So it's time for upgrades :)))

So far I got the stock twin turbo off and pretty much I broke every single pipe bolt etc ( it was a night mare). Now slowly taking the intake side off and then head off!! 

Mod list:

Bw s300sxe (8376 - 62mm) ts .91

Ts 6boost mani 

Turbosmart 50mm ext pro gate

3.5" tbh (no cat)

4" intake pipe

avcr boost controller or I can use the ecu to control the boost ( which one is better) 

fmic 100mm

3" intercooler piping 

Bosch 2000 cc injectors (any issue using them on e85)

walbro 460l fuel pump ( thinking of going 2 in tank pump setup)

turbosmart fuel reg 

tomei hg 87 bore and 1.2 thinkness with intake n exh as well

tomei type valve springs 

arp head studs

tomei 1.5 oil restrictor 

new radiator and also all the hoses are getting changed

im getting the timing done with all the seals etc 

setting up an oil catch to control the oil better.

hopefully will reach the 400kw as the motor still stock but will see how far it will get to before it blows up.

i will be taking pictures as I go so hopefully everything will turn out to be good.

 

any suggestions or tips to help please let me know.

i hope you guys enjoy it

thanks

 

 

 

image.jpeg

image.jpeg

image.jpeg

image.jpeg

  • Like 3
Link to comment
https://www.sau.com.au/forums/topic/466448-33r/
Share on other sites
  • 2 weeks later...
  • 3 weeks later...
Lethal26 Contributor

Lethal26

Posted
  • Author
Posted

Can you pm his details?

i have been very busy with work didn't get much time to work on it. Also wtac this weekend so hopefully sometime next week I will do some work on it.

Also waiting on a new oil temp sensor as I've deleted the oil/ heat exchanger.

Rocker covers and intake getting painted next week. 

Hopefully a week or 2 and everything will be done. 

Good choice on the turbo bit expensive good luck with everything... everyone seem going with bw8374 the response is amazing!! How long until you will finish with your car?

 

cheers 

Link to comment
https://www.sau.com.au/forums/topic/466448-33r/#findComment-7783517
Share on other sites
  • 5 months later...
Lethal26 Contributor

Lethal26

Posted
  • Author
Posted

So finally got the car done!!
It made decent power.. 458rwkw @ 28psi
Long story short the engine let go after 1 week

Time for rebuild

Power goal 600-650awkw


I wan do things once not twice so
Trying to decide between a stroker or stock displacement
Head work
Fuel system etc

Basically any tips or help will much appreciated

Link to comment
https://www.sau.com.au/forums/topic/466448-33r/#findComment-7820855
Share on other sites
  • 1 month later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • MBS206
      What should I do next to hold the head on

      By MBS206 · Posted

      When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • jez NF
      The Evolution Of "night Fury"

      By jez NF · Posted

×
×
  • Create New...