Jump to content
SAU Community

Recommended Posts

hey was flipping through the speed mag to see where they got it wrong with the new skyline and saw (to my amazement) that the new 2.5L boxer engine in the new wrx to come out in the next couple years or whenever claims to be able to acclelerate from 0-100km/h in 4.1 seconds and 0-160km/h in 10.4 seconds. CMON NOW, REALLLY!!! who are they taking on the ferrari enzo and mclaren F1. Now the they say the enzo goes from 0-100 in like 3.3 or 3.6 seconds or something and its powered by a bloody formula 1 stlye engine. So are subaru trying to say that with 0.5L more capacity, another 150nm of torgue or something that the thing can accelerate that fast??? I still think its :bs!: as i cant believe it until i see it i guess. AND who was driving it to get a claimed time like those? PLUS wat time will nissan claim with the new gtr as their new engine is like factory 470hp with 568nm of torque and wateva else, will it do 3second flat 0-100. CMON now really...

Tell me if there is any truth to this subaru claim and feel free to point out any errors i have made as i would like to hear any feedback from u guys

Link to comment
https://www.sau.com.au/forums/topic/46663-new-25l-wrx-in-speed-mag/
Share on other sites

The 2.5 in THAT car sure as hell better be an all new motor as the USDM STi is already 2.5l and doesn't have a 0-100k figure like that?!?!?!

If anyone wants info on the 2.5L conversion, I suggest they read Fast Fours, join rexnet.com.au and speak to Damo who at last count, had imported 50+ 2.5L short motors from the USDM STi into Aus.

Adrian

As far as i'm aware, the 2.5L in this UK sti is 1. More powerful and 2. based on the Spec-C. Which means that it is a LOT lighter then it's american counterpart. I believe most American magazines have got high 4's for their STI. Car and Driver magazine recorded a 4.6 and 13.2sec 1/4mile. Light car+powerful engine+AWD equals extremely quick 0-100km/h, but the top end of these cars aren't as great, same as 60-100km/h roll on acceleration etc.

if the article in Q is the UK tuner's STi Type 25, that is indeed based on a JDM STi Type-RA Spec-C (currently the quickest factory car in Japan, competition inc. Evos, GT-Rs, NSX-Rs, etc). Converted with the JDM 2.5 as mentioned above, would be an awesome combo. JDM and the rest of the world for now are sticking with the 2.0 boxer, which is a higher revving engine, feels more race-car like in my own opinion. The Type-25 has been reviewed by a few UK mags, very worthwhile read.

I know a GT-R with 1bar boost, full exhaust system and good tyres can do 0-100 in the low 4 second mark.

my friend got a 300kw@wheel R33 GTR

full house 2.7L tomei engine

STOCK turbo running 1.4 bar <- not blow YET

R compound tyre

and did 4 - low 4

The times could be right, but to be honest I don't know of any offical test times for the EJ25T. But do I know JDM EJ20T makes more power then the US EJ25T and the 2L still has plenty left too. Goes to show how far 2L turbo engines have come since.

The STI Spec C is no doubt a very quick car, about 2 version back now with the bug eye look...quicker due to weight reduction.

The STi S202 based on the Spec C is even more quicker with alittle more power and alittle lighter than the Spec C. Now this is a special car with only 400 built.

http://www.apexjapan.com/news/s202/s202.html

Also the UK Prodrive STi version isn't faster then the Evo FQ300 just yet, AUTOCAR did a massive speed and brake test late last year and the FQ300 was still a good second quicker down the quarter.

Not a very good scan but you can make out the 0-100mph-0 test times. The time break down are as follows: 0-60, 0-100 and 100-0. The FQ300 does well to clock a 4.42s (0-60mph) and a 11.99s (0-100mph); while the Prodrive STi clocks a 5.08s (0-60mph) and 13.17s (0-100mph). Both cars were tuned to 304ps or 300hp, thus the meaning of the FQ300 name. Though I still can't believe the FQ300 clocked such a quick times considering the JDM version does mid-low 13sec quarters and has more ponies...strange...must have been a very ideal day. Never doubt these cars they are now even quicker!!!

2033FQ300ProdriveSTi80-thumb.jpg

As far as i'm aware, the 2.5L in this UK sti is 1. More powerful and 2. based on the Spec-C.  Which means that it is a LOT lighter then it's american counterpart.  I believe most American magazines have got high 4's for their STI.  Car and Driver magazine recorded a 4.6 and 13.2sec 1/4mile.  Light car+powerful engine+AWD equals extremely quick 0-100km/h, but the top end of these cars aren't as great, same as 60-100km/h roll on acceleration etc.

They might be quick to 100 but to only run a 13.2 over the 1/4 mile looks like subaru have worked to make the car get to 100 quick but after that its nothing special. No where near supercar territory there if it can only pull a 13.2 1/4.

I have and have watched the BMI with the spec C wrx and it is damn fast on the track but wouldnt be a good dailydriver with all the stuff they left out to make it lighter.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
×
×
  • Create New...