Using a an R33 steering pump in a 32. That easy?

[osakarory]

Using a an R33 steering pump in a 32. That easy?

I am hoping to get rid of all the ugly HICAS lines and solenoid in the engine bay of my 32 so I picked up a 33 pump and bracket (and a new two input tank).  Looking at the diagram of the system it seems that I can remove everything and not need to plug any thing on the rack correct?  I don't have the luxury of being to keep the car off the road for long while I do this so I am hoping to plan it all in advance to hopefully do it stress free.  Is it really just as easy as removing the old and putting in the new? No lines are extra crap needed? 

Thanks!

[gts25]

hey mate, i just had a lock bar on my r32 gtr installed last week. pump wise, you dont need to touch it. The outlet at the rear of the pump can be simply routed through the power steering cooler on the front of the radiator, drivers side. disconnect the high pressure feed from the pump at the hicas solenid. and connect that to the p/s cooler using low pressure line.

[gts25]

here is a good thread on the above, pay attention to sydneykids posts: