Jump to content
SAU Community

Recommended Posts

New guy with M35

Hey guys,

I've just bought my first stagea after wanting one for ages. M35 bone stock apart from a set of rims.

I love it. It needs a few things doing to it but that's half the fun.

It came with a full service history so I hope it's been looked after.

The one problem I do have and I have read EVERY post in here about it is my 4WD light is on.

what makes this so different? Well after reading a thread in here on how to clear codes (turn on, press acc pedal 5 times etc) my light goes off. I drive it and I have functioning 4WD (split torque gauge works).

BUT when I re start the car [normally] the light will be on so I'll turn car off, go through the code clearing actions and BooM, all good ????

My intention is to try the relay under the airbox , failing that I'll bleed the lines of any air.

Has anyone else had what I have described ?

Link to comment
https://www.sau.com.au/forums/topic/466787-new-guy-with-m35/
Share on other sites

Thanks Josh.

Thanks to all the information in this forum that was the first thing I checked. Currently my level is just above full.

Would that amount prevent the pump from pressurizing the system?

Also do you have any idea as to why I can clear the code and it works fine only for the code to return?

I'm reading all about how our cars are NOT OBDII so clearing them could be a hassle.

55 minutes ago, RSXVRider said:

Thanks Josh.

Thanks to all the information in this forum that was the first thing I checked. Currently my level is just above full.

Would that amount prevent the pump from pressurizing the system?

Also do you have any idea as to why I can clear the code and it works fine only for the code to return?

I'm reading all about how our cars are NOT OBDII so clearing them could be a hassle.

I don't have a stag yet but about to own one. Has done a bit of researching on this issue as well as the car i'm getting having the same problem.

By the sound of it, if any luck, a flush + new fluid my help you. There is also a big fuse (?) (20amp) somewhere that can be replace to fix the issue as well. If all of those mentioned still dont' fix it, better start sourcing a secondhand unit as the $2 pressure switch (built in) is known to fail and Nissan won't sell them separate.

1 hour ago, RSXVRider said:

Thanks west.

Well ive just found out that if i start the car with the synchro switched on i dont get the 4WD light on.
Fully functional 4WD.
Weird right.... lol.

Have heard of that as well but i'm afraid it's only a band-aid fix and not a long term solution, then again i could be wrong, only interpreting what i have read so far.

So i put my new relay in.
Statyed car. No 4ws light.
Small deive light stays off. Winning.
Turn car off.
Turn car on. Boom. 4wd light on again. Hmmmmmm.

Can anyone tell me what fuse is the 4wd? There are some big ones bwhind the battery but noting is labeled

It sounds like a pressure switch fault mate; very common. The best thing to do would be to get it on a scantool, and find out 100% what the fault is.

The fuse (it's more a fusible link) for the ATTESSA pump is in the block in front of the battery. 

It's labelled ETS from memory.

Thanks West. I hadn't seen that thread before.

I did try the disconnect single wire to the pump to bleed it but the pump wouldn't activate.

I'm going to give it another go on the weekend as i just read on another tread that you're supposed to bleed the gearbox nipple. I was attempting to bleed the ATTESSA pump nipple.

Plus one tread says to disconnect then bleed where as another one says to disconnect then re-connect straight away to bleed.

15 hours ago, RSXVRider said:

Thanks West. I hadn't seen that thread before.

I did try the disconnect single wire to the pump to bleed it but the pump wouldn't activate.

I'm going to give it another go on the weekend as i just read on another tread that you're supposed to bleed the gearbox nipple. I was attempting to bleed the ATTESSA pump nipple.

Plus one tread says to disconnect then bleed where as another one says to disconnect then re-connect straight away to bleed.

From this thread?

 

So after re reading all the threads I managed to work out the correct way to bleed the ATTESSA pump.

There was a ton of huge air bubbles in the line so I was quietly confident that was my problem.

I flushed the entire system with new fluid just to find my light is still on ..... Grrrrrrr

Well at least I know my pump actually works...

7 minutes ago, RSXVRider said:

So after re reading all the threads I managed to work out the correct way to bleed the ATTESSA pump.

There was a ton of huge air bubbles in the line so I was quietly confident that was my problem.

I flushed the entire system with new fluid just to find my light is still on ..... Grrrrrrr

Well at least I know my pump actually works...

So what's your method of doing it?

1. Prepare. Bleed hose on nipple of the transfer case (just behind trans on drivers side). Open ATTESSA fluid bottle with funnel in.

2. Turn key to ACCESSORY on. Don't start car. 

3. Disconnect the pump wire 10cm up from the OBDII connector. Leave it disconnected. You will hear the pump 'cycle' ONCE.

4. Using 10mm open ring spanner, loosen bleed nipple. As the seal breaks open the pump will cycle in a 'rhythm'. as you undo the bleed screw more the 'rhythm' becomes a constant purge from the pump."

5. Go to the back of the car and as the funnel is already in your canister, simple pour more fluid in.

6. Over fill (past the line) in order to give you time to get back under the car and close the bleed valve.

7. Reconnect the single wire connector for the pump.

8. Turn key back to OFF.

9. Check fluid level.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for all the replies fellas. Gonna finish putting it back together and see how it handles the set up. If it starts pinging it’ll be parked.
    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
×
×
  • Create New...