Jump to content
SAU Community

Recommended Posts

WANTED! DR30 LAMINATED WINDSCREEN

Hey lads and ladies. 
Ripping my hair out trying to find a coupe front windscreen in aus that is laminated.. 
Any chance at all sedan screens fit?
Need this before the 8th of October.

My location is Toowoomba 4350. 
Nissan, Obrien ETC have part numbers that are different to the sedan screen that have been made obsolete.. 
Will take any condition at this stage as long as it's intact and I can get my compliance plate :):)

14195462_1433587603323969_3863590611633766201_o (1).jpg

13699554_10206851719758091_121912489_o.jpg

Link to comment
https://www.sau.com.au/forums/topic/467011-wanted-dr30-laminated-windscreen/
Share on other sites

My parts book says #72712-27S00 for the hardtop Laminated Windscreen and it's still priced in Japan at about $600.00

I have asked Macarthur Nissan in Campbelltown to check if it is available and I will advise when I know more.

PM me with a contact number.

Cheers,

Dennis

  • Like 1

I called Nissan too but to no avail. Called NZ and also Japan. If you get a different answer please let me know as I need one too and I was organising to have a batch made by a guy who does racing glass - for anyone else that wants one please let me know. I can also have them done with a heated element.

  • Like 1
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
    • Yeah - I mean, go the other way. Smaller range. Not larger.
×
×
  • Create New...