Jump to content
SAU Community

Recommended Posts

Now on Sun 15-08-04......

Who's up for a Newcastle cruise on sun 15th of August? It should be a good chance for the locals to meet up and put faces to cars. Everyone is welcome.

Meeting Place: Spears Point park at 12:00, leave at 1pm (lunch before we head off? Fish and chips shop at Warners Bay)

Destination: Newcastle Foreshore, might have to park in nobby's carpark, depends on numbers.

I was thinking we could cruise around the lake to Belmont through Warners Bay and head up the highway through Charlestown. Then down through Merewther Heights to the foreshore. What do people think?

Sunday arvo in newcastle is generally a bit of a cruise day, so it should be fun.

Lets dominate the foreshore with skylines.

email me if you have any comments: [email protected] :)

List of People attending:

NYL83R

Lenno

boj01

KE55E

MIC33R

wizard 2k

BNR32 ?

GT-B05S

Ring me on 0410304228 if anyone needs directions

Link to comment
https://www.sau.com.au/forums/topic/46753-newcastle-cruise-08-08-04/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

I was going to post a cruise from thronleigh maccas to KK to meet up with the newy people if you guys are interested?... (sorry for a hijak) then we could arrange this cruise again when all the newy peeps will b there?....

I'll get some more info and let yaz know...

This cruise still a go ahead ?, or getting postponed to another weekend ?

Lenno

Yeah i think we will have to make it for another weekend, any ideas? maybe the next weekend or something. unless there are other people interested, it won't be as much fun with just us 2 :D




  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...