Jump to content
SAU Community

Recommended Posts

Gday guys

I was wonderig if anyone out there had]s experienced the problems i am having with my misfiring engine. Currently the engine accelerates up to 3000-3500 ok. The problems then start. If I try to accelerate using full throttle the engie misfires and pops out the exhaust. It feels really flat and hesitant. Once the engine finally reaches approx 5500-5800 it takes off like a rocket all the way to the limiter. I am having thoughts on the coils and perhaps exhaust cam timing.

Mods are:

Hi flow turbo, 3" inch mandrel turbo back, plug gap 0.7, boost set at minimal 12psi,

checked A/F ratios , are fine,

If anyone has any thoughts could you please assist before i need to start spending big bucks, Knowledge in Tassie is minimal as the low volume of these vehicles.

Cheers

Nick

Link to comment
https://www.sau.com.au/forums/topic/46767-misfiring-rb25det/
Share on other sites

Hi Nick,

Am interested to know what kind of boost you are running. Is the amount of boost dropping off at high rpm? I ask this because it is harder for a spark to jump the same gap in a higher density atmosphere. Reducing the gap or cutting back boost may prevent the car misfiring, but will put a dent in your performance as well.

I'd be inclined to try out a set of Bosch Super 4 spark plugs if you can get a set to suit, as they do provide superior ignition. Otherwise you may need to get a set of coils or an ignition module with a stronger output depending on which is holding it back.

Link to comment
https://www.sau.com.au/forums/topic/46767-misfiring-rb25det/#findComment-950796
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...