Jump to content
SAU Community

Recommended Posts

Hey guys, having a problem on my 97 s2 r33, when starting the car cold it will start up fine but cannot be driven for 3 - 5 minutes as when the throttle is pushed the engine sputters badly, can anyone help or had similar issues?

So far I have -

Cleaned the AAC valve

Cleaned the AFM

Cleaned the throttle body

Checked for vaccumm leaks

Tried adjusting the idle screw

Current engine mods on the car

Haltech platinum ecu

750cc injectors

Walboro 250

Top feed rail

Gt3076r

Spitfire coilpacks

Z33 AFM

Any help massively appreciated as it's slowly getting more and more annoying

Link to comment
https://www.sau.com.au/forums/topic/468430-rb25det-cold-start-sputter/
Share on other sites

See these threads all the time. Most are usually tune related.  But more information is needed to work your problem out.

How long has it been happening? Have you done anything recently that has triggered it idle shit?

Edited by breaker1845
  • 3 weeks later...

Bought the car around 2 months ago and it started fine but idle was high so I cleaned the afm, throttle body and idle valve etc and the idle was better but then I think the cold start problems were amplified, could the car have been tuned whilst the afm and stuff were dirty thus causing it to run differently now?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
×
×
  • Create New...