Jump to content
SAU Community

Recommended Posts

NISMO GT PRO 2way LSD differential kit - Silvia/Skyline

 

Back up for sale - I've sourced a GTR axle setup so I no longer have use for this kit - buy it so I can use the money for the rest of my build <3 

DETAILS - 

This Nismo 2 way diff is up for grabs. Part number is - 38420RS220. It is the model for Silvia's - S13, S14, S15, as it comes with 3 x 2 NISMO half shafts as shown, but can work with all Skylines  from R32 up (not GT-R) with the right bolt pattern half-shafts (5 x 1) and most Nissan's using an R200 diff. 

This kit has only been opened to take the picture shown - comes with everything visible in the picture, including Nismo competition diff oil, bolts, gasket, bearings, seals, Nismo half shafts, decals, and NISMO certificate of authenticity. 

Prefer pick up on Gold Coast, QLD. But am happy to post wherever necessary Aus wide with cheap Australia Post eParcel or courier rates that include tracking and a signature.

Let me know if you have any more questions. 

Price is SAU only special of $1300 flat - advertised elsewhere for $1350. 

 

GTLSDPRO.jpg

Edited by GUWOP
Link to comment
https://www.sau.com.au/forums/topic/473216-parts/
Share on other sites

  • 2 weeks later...
  • 6 months later...
  • 2 weeks later...

Brand new NISMO GT LSD and GT LSD PRO half shafts in 3 x 2 bolt pattern.

Selling as unneeded. Fits the NISMO 1.5 and 2 way differentials but not the stock VLSD or other standard stuff.

Will post or pick up on the Gold Coast, QLD.

$450 or nearest offer takes em. 

24829443_810460352482575_1174374596_n.jpg

24891412_810460392482571_1399111371_n.jpg

24891480_810460329149244_15159320_n.jpg

24891484_810460309149246_368901141_n.jpg

24891528_810460365815907_949073817_n.jpg

Link to comment
https://www.sau.com.au/forums/topic/473216-parts/#findComment-7861612
Share on other sites

  • 1 month later...

- SSR Minerva Wheels in 17" x 8" - 5x114.3 
- Offset is +30/ +35 and all are 8" wide (stickers have come off but I've compared to other wheels I have in + 35) 
- Overall good condition, just need a clean and a polish for the lips. 
- Slight dent on the inside of one of the rears. Was told it holds air fine. 
- Paint in centres is great and original textured finish. 
- Can post at buyers expense (cheap rates) 
- PayPal ( PayPal fee) or cash in hand only 
 

$1600 ONO 

 

 

IMG_0975.JPG

IMG_0978.JPG

IMG_0974.JPG

IMG_0976.JPG

IMG_0977.JPG

Link to comment
https://www.sau.com.au/forums/topic/473216-parts/#findComment-7866348
Share on other sites

Work Japan VS XX Wheels

- measurements are 17" x 9" wide, 35 offset

- Fresh polish on the lips

- Chrome is good on faces but a bit bubbly on the sides of the spokes. Still good on the face of the wheels and not worth worrying about.

- One has some little chips when it tipped over after getting tyres put on.

- Tyres are Yokohama A Drive in 235 / 45 / 17. Freshly installed and balanced. Only used to roll car around while it gets worked on - they are new. Cost $180 each and $40 worth of install.

- Comes with genuine Work centre caps
 

$1200 ONO 
 

IMG_0970.JPG

IMG_0971.JPG

IMG_0972.JPG

IMG_0973.JPG

Link to comment
https://www.sau.com.au/forums/topic/473216-parts/#findComment-7866350
Share on other sites

Work Wheels Japan VS-SS. Rare and something different to the usual.

These will ideally need a refurbish but could still be used if you don't care about them needing a refurb. No centre caps sorry (didn't come with them).

One rear has had a dent repaired but am told it still works fine. 

I dig these but got too many wheels and only 1 car to put them on, so... 

SPECS -
- 18 x 8.5 +31 for two wheels
- 18 x 9.5 +31 for the other two

$1350 ONO 

 

$_20 (8).JPG

$_20 (7).JPG

$_20 (6).JPG

$_20 (5).JPG

$_20 (4).JPG

$_20 (3).JPG

$_20 (2).JPG

$_20 (1).JPG

$_20.JPG

Edited by GUWOP
Link to comment
https://www.sau.com.au/forums/topic/473216-parts/#findComment-7866352
Share on other sites

  • 1 month later...

Up for sale  -  RHS Quarter cut from R32 GTR. 

Comes as is. Good condition besides one dent (easy fix). Wheel arch/Lip not rolled so can be unpicked easily. 

Can help with shipping or drop off for extra within SE QLD. 

$1200 or trade for RB26 HEAD

IMG_1156.JPG

IMG_1157.JPG

IMG_1160.JPG

IMG_1162.JPG

Link to comment
https://www.sau.com.au/forums/topic/473216-parts/#findComment-7869274
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...