Jump to content
SAU Community

Hello!

CoolPC

By CoolPC,
in Four Door Family & Wagoneers

 Share

Recommended Posts

Sydneykid Grand Master

Sydneykid

Posted
Posted
I'd be interested to know if a R33 exhaust would fit on a RS Four.  The front pipe & dump pipe look the same, but I haven't had a chance to compare the cat back section.

Also, my suspension in the Stagea is pretty firm for standard (they all look standard), handles very well for stock, would like to drop it about 25mm but that's about all.

J

Hi J, it is my understanding that an R33 4 door exhaust is pretty much the same. I am going to use the split dump and high flow cat off the R32 GTST. Then I will check and see how much I need to modify the R32 GSTST exhaust for it to fit as well. I might as well use it since it is getting a titanium exhaust with the new engine.

Our Stagea is far from firm, the spring rates may well be OK but it needs new shocks real bad. I am going to get a set of Koni Sports and move the circlips down a couple of notches. Once I work out which model shock it needs.

Then a pair of stabiliser bars and some adj caster, the steering is too light with not enouigh precision for my tastes. Should handle pretty good then. :(

Link to comment
https://www.sau.com.au/forums/topic/47354-hello/page/2/#findComment-960449
Share on other sites
BoyWhoCriedWolf Grand Master

BoyWhoCriedWolf

Posted
Posted

I have some Tein "S" springs coming from japan, they are made for the Staj with correct spring rates etc. I can get these for around $350.00. Expect around 4 week wait as they are ex Japan only. Exhausts (from what i have been told) are different to 33 2dr and 4dr, and different again from r34 stuff, if you find something that fits please let me know as i want an exh sooner rather than later.

Ken

Link to comment
https://www.sau.com.au/forums/topic/47354-hello/page/2/#findComment-960477
Share on other sites
Sydneykid Grand Master

Sydneykid

Posted
Posted
Thanks SK.  That's one thing I have noticed about the Stagea, and that the steering is very light !!  About the split dump pipe you've got, is that a CES dump/front pipe ??  What sort of $$ do they retail for and who sells them?

J

Nope, it's a Performance Metalcraft fabricated stainless steel work of art, that I promptly covered with exhaust wrap. I might get it ceramic coated before I put it in the Stagea, so I can show it off. :P

Link to comment
https://www.sau.com.au/forums/topic/47354-hello/page/2/#findComment-961064
Share on other sites
Guest

Guest

Posted
Posted
I have some Tein "S" springs coming from japan, they are made for the Staj with correct spring rates etc. I can get these for around $350.00. Expect around 4 week wait as they are ex Japan only. Exhausts (from what i have been told) are different to 33 2dr and 4dr, and different again from r34 stuff, if you find something that fits please let me know as i want an exh sooner rather than later.

Ken

Who is complying your car as CAM who did mine also build their own full exhaust system cat and muffler and had it emission tested so if an after maket one comes in you dont have to buy ex Nissan.

If it comes here in WA I have one.

Link to comment
https://www.sau.com.au/forums/topic/47354-hello/page/2/#findComment-961112
Share on other sites
Sydneykid Grand Master

Sydneykid

Posted
Posted
I have always wondered about this: can you adjust the power assist on the steering to weight it up a bit?

LW.

Not easily, you could try a larger pulley on the power steering pump or a smaller pulley on the crankshaft. That would slow down the pump, but you would have to experiment with the pulley sizes till you found one that added a bit of feel but didn't make parking too tough.

Better to add some caster, that serves three purposes. It adds more feel to the steering as more caster = more resistance to steering. Plus the car turns in better because of the extra caster. More caster also helps the car drive straight. So it's a win, win, win upgrade. :)

Link to comment
https://www.sau.com.au/forums/topic/47354-hello/page/2/#findComment-961266
Share on other sites
Sydneykid Grand Master

Sydneykid

Posted
Posted
SK: Interesting, interesting. Will be good to hear what your results are.

Although its a fine line, does the Stagea lack feedback as well as being overassisted, or just overassisted?

LW.

I prefer my cars to have a fair bit of feel, turn in instantly and track straight. The Stagea doesn't quite make it on any of these. Being 4wd and heavy, there is probably a bit of wear in the radius rod bushes not helping it either. For $100 or so it's a cheap fix. :)

Link to comment
https://www.sau.com.au/forums/topic/47354-hello/page/2/#findComment-961287
Share on other sites
  • 1 month later...
CoolPC Enthusiast

CoolPC

Posted
  • Author
Posted

Just thought I'd give a quick update, the car should be done sometime next week. Didn't have any real problems at all, worked out the "aftermarket suspension issue" as well as the aftermarket exhaust without any dramas or a hole in my wallet so now I'm eagerly awaiting the day I can actually drive the thing, because I really enjoyed driving it to the compliance workshop (unreg vehicle permit)!

Link to comment
https://www.sau.com.au/forums/topic/47354-hello/page/2/#findComment-998008
Share on other sites
  • 2 weeks later...
CoolPC Enthusiast

CoolPC

Posted
  • Author
Posted

Got the car back today. I was going to get it registered too but the Department of Transport I went to (Sherwood) didn't want to register it for me and said I have to go to Greenslopes :D Ah well, I'll get it done tomorrow morning...

Also have to put my aftermarket exhaust and lowered HKS springs back in, then I'll be set!

Link to comment
https://www.sau.com.au/forums/topic/47354-hello/page/2/#findComment-1013940
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
    • Dose Pipe Sutututu
      M35 Aftermarket Fuel Pump

      By Dose Pipe Sutututu · Posted

      Here's the chart for fuel pressure vs. current draw, assuming your base fuel pressure is 3 bar and you run like 0.5bar boost on WOT, you should only momentarily hit 9amps here and there. (Ignore my prev post, I cannot read a chart these days it seems)
    • GTSBoy
      RB25 Drama's

      By GTSBoy · Posted

      Those comp test results are not hideous. Whether they are accurate or not (ie, when that comp tester says 140 psi, is the real pressure120, 140 or 160?) is unknown to us. The state of the battery used to crank it over is unknown, etc etc. Many people around here would say that the absolute values and the spread are perfectly fine to just add boost and keep going. I personally would be happier with a narrower spread than that, but even the diff between 125 and 145 is not terrible. That one cylinder at 125 though, has probably copped some damage relative to the others. You should inspect the valves seeing as you've got it open. Do you know how to measure installed ring gaps? That, and an inspection of the rings themselves, is how you will determine whether they need to be replaced. If you're not good to do these things, take the block and the pistons and rings to a shop that is, and ask them for the go/no-go on them. Do the bores need a hone at all? If so, you might well be justified in getting some different pistons in order to get away from the ring supply problem. Whether you're happy to spend a lot more money right now, on more gear, rather than less money, but an amount that looks stupid given that you will only get a handful of rings in exchange for that money, is for you to decide.
    • iain_ST44GA
      M35 Aftermarket Fuel Pump

      By iain_ST44GA · Posted

      also possibly backed up to my filler and shat down it! 🤣
    • Julsmadrid
      RB25 Drama's

      By Julsmadrid · Posted

      Ok so i would love some advice here please, i purchased an R33 a few months back and its had a few mods done to the engine, its an RB25det running a Master ECU, 1200cc injectors, bigger turbo, oil cooler, oil filter relocation kit, Spool H-beam rods, acl/ross pistons. When i removed the motor from the vehicle (as its getting a respray) i thought i would compression test it and these are the following results. Cylinder 1-145psi, Cylinder 2-143psi, Cylinder 3-125psi, Cylinder 4-145psi, Cylinder 5-140psi, Cylinder 6-135psi this test was done with the motor on the ground and powering up the starter motor. I dropped the sump and found broken oil squirters on cylinder 3,5 and 6. I was told my rings are probably worn so i stripped the motor completely to get a new set of rings for it. The trouble is no one has these rings anywhere and they have to be custom made by Ross over in the states and will cost about $600+$200 delivery. My question is how can i tell if my rings are at fault and if they are still ok and is this price ok for a set of rings?
×
×
  • Create New...