Jump to content
SAU Community

Recommended Posts

guys,

Could anyone advise me if it is possible to use a Power FC on an RB25DE/RB30 hybrid turbocharged motor.

The problem I see is that while it would make sense for an RB25DE ECU to work (i dont know if power fc are made to suit this??) but now being a turbo motor, it could complicate things?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/47422-power-fc-applications/
Share on other sites

This is a interesting question because the rb25de does not have VCT where the DET does. The main difference between the rb20det and rb25det is the use of VCT & different imp injectors and you cant use a rb25det PFC on a rb20det unless its modded by AP Engineering.

Maybe a programable RB20DET ecu would be the go ? Id be interested to know if a PFC would work on this or not...

Doing a little snooping around, i found on the APEXI site that they list the same part for R32-R33 89-99. This would lead me to think that the same unit is applicable for the RB25DE and RB25DET.

414-N026 89-99 BNR32/BCNR33 D-Jetro

414-N029 89-99 BNR32/BCNR33

I am a bit lost as to what D-Jetro is? Sounds similar to Bosch K-Jetronic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...