Jump to content
SAU Community

Balancer crank trigger questions.

Gtir-keiron
 Share

Recommended Posts

Gtir-keiron Community Regular

Gtir-keiron

Posted
Posted

So im in the final stages of putting my gtr back together. I have the baby ati balancer the 600hp rated one that has air con on it. But i am told i should go crank trigger but every balancer i have seen does not support air con. only the 2 belts. Are there any options at all? 

Link to comment
https://www.sau.com.au/forums/topic/474403-balancer-crank-trigger-questions/
Share on other sites
burn4005 Proficient

burn4005

Posted
Posted

the Platinum racing crank trigger kit (version 2) apparently works with the ATI 600hp balancer.

its a 12 tooth trigger wheel, but if you want a 36-1 or 60-2 you're going to have to go either the 600hp Ross kit or a custom bracket.

other option is use an MGT trigger kit

http://www.gtr.co.uk/forum/439562-mgt-trigger-kit-r32-r33-r34-gtr-gtst.html

but it uses reluctor (VR) sensors and if you have an BNR34 the engine fan doesn't give enough clearance for it.

  • 4 weeks later...
Bowlsclubboy Apprentice

Bowlsclubboy

Posted
Posted (edited)

Ross Performance have a kit which allows the use of a 1000+hp triggered damper, without losing AC. Plus you can have the trigger wheel cut to whatever flavour you like.

https://rossperformanceparts.com/product/nissan-rb-air-conditioner-relocation-kit/

Edited by Bowlsclubboy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      So yes. All of them. Something like 98% of all fuel in the USA has 10% ethanol: https://afdc.energy.gov/fuels/ethanol-fuel-basics It's labelled as like, AKI, 87, 91, 93 with an E10 or E5 or E15 label on the pump. At a certain point, it's not just "E10" instead of 91. It is 91, 95, 98, and all of them have 10% Ethanol in them. You can also get E85 and E30 which is why you do see some people rolling around with E30 tunes in them.
    • Stringycheese
      Blue slip

      By Stringycheese · Posted

      Thanks for the response. This is an 04 EP3 Type R. JDM spec. Fairly certain they're just basic BC racing coils. I do plan to keep as the ride quality on stock I've been told is pretty meh given Sydney roads. If I were to go down that avenue, does NSW require them to be a certain spec (close to original) etc?
    • PranK
      Blue slip

      By PranK · Posted

      Should have asked what is the car?
    • PranK
      Blue slip

      By PranK · Posted

      I've had two super conflicting experiences with blue slips. My 30 year old E39 waltzed through with no issues but my brother in law was knocked back on 12 y/o 3 series due to wiper blades and some cracking in a control arm bush.  What kind of coil overs? Do you want to keep them after?  If it was me I'd get some dirt cheap shocks and springs from eBay or scumtree. Not ideal but will get you over the line and might even be less than $1k.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Hey guys,  Way back when (about 15yrs plus), I picked up a beautiful set of Tein 'Super Racing Spec Circuit Master RE' coilovers from Russman. I have legit never fitted them to my car, as it was garaged indefinitely while i bought a house Yada Yada. They look brand new! Anyway its time to pick up where I left off, and have started doing some khanacross and am booked in for a hill climb next month. The car has some hard af Nismo shocks in ATM, which has me wanting to upgrade again, and now I am left wondering if it's worth having these teins rebuilt? I think they where an ok shock back then, but how do they compare to what's on the market now?  Shockworks/mca are 2800+, and I am sure they are great. But if I can have these rebuilt and be better than, say, a set of bc's for around the cost of bc's, I would be happy with the performance v cost trade off.  If they are considered outdated and rubbish these days, so be it, I'll put them on the shelf and be happy to look at the pretty green colour while I save for the SW/MCA option. Grateful for your thoughts on the matter, and suggestions on who could do the rebuild if it's a worthwhile pursuit.  cheers, Rowdy. 
×
×
  • Create New...