Jump to content
SAU Community

Recommended Posts

1. Just to confirm, PFCs are defectable (in South Australia), correct?

2. Assuming they are, how difficult/expensive are PFCs to remove when you cop a defect? Can you put the standard ECU back in ten minutes, or do you have to re-tune the stock ECU and then re-tune the PFC the day after as well?

3. How does the revolution limiter/lock work? I know you can lock your revs to a certain RPM, but how exactly do you do it? Is it a thirty second task? Is it equally as easy to undo? If it is, what stops your mechanic etc from taking it off? Are they commonly used as a secondary method of theft provention?

4. Where is the cheapest place to buy a PFC with hand controller?

5. Do I even need the hand controller? Is the hand controller useful for an average person, or would I need mechanical knowledge to benefit from having it?

5. How much extra is the boost controller thingo and is it better than the AVCR or other cheaper alternatives?

6. I've heard rumours regarding a new model being released soon, complete with hand controller at a lower price point than what they're currently selling at. Can any of you confirm this?

TIA for your answers.

1. not sure, i'd say so.

2. yes, just bang the standard one back in and drive away. depending on mods of coures, bigger injectors or turbo and you wouldnt do it. The powerfc holds the tune for along time.

3. rev limiter is a fuel cut in the L-jetro version (the common one everyones got)

4. www.nengun.com - excellent price and service in my experience of late. ive spent many dollars with him.

5. not really, i dont have one. detonation registers on your check engine light when the pfc reads a knock of 60+. i dont think you'd need huge mechanical knowledge to understand it tho, it is very useful for realtime monitoring.

6. this is true and is current. apexi only sell packages and at a pretty cheap price too. check out nengun.

-rb25

Echoing, most of rb25's comments, but here we go anyway :P

1. Dunno. Probably.

2. Yep, as long as the engine is close enough to stock you should be right

3. You just go through the menus on the hand controller, pick rev limit, then press up or down until you see the number you want. It's a bit tedious if you're making big changes (10rpm at a time!) but can be useful. You can set the rev limit lower than your idle, just to confuse it, or if you need to give your car to a panel beater or a mechanic, drop the limit to something LOW. I set mine to 1800rpm last time, and took the hand controller with me so they couldn't change it back.

4. Dunno. I got mine from someone on these forums :)

5. No you don't NEED one, but it's well worth getting it for the monitoring what the engine is doing, and for making the occasional small change (like the rev limit)

5 (2nd one :)). From what I hear it retails for something like $800. I have no idea how it compares to other similar devices, but the fact it interfaces with the PFC can't be a bad thing.

6. Wouldn't have a clue :)

Defectable,

5 minute removal and fitting of the standard ecu. Only problem you will have is if you have changed things like the Airflow meter etc.... Then, you obviously cant run the standard ECU.

With the hand controller you are able to monitor temp, timing, injector etc etc....

Boost limiter is easy to set.. only takes about 30 seconds.. and you dont really need the hand controller.

1) yes defectable

2) easy to take out but if u are running bigger injectors possible z32 afm ya car wont run at all

3) choose ya rev limit and away ya go...need commander for that (hand controller)

4) i just bought full kit for 1240 for my 180...there ppl selling them for 1130 but u hav to pick them up from customs so hence u would hav to pay 10% gst when picking them up

5) dont need it but better off getting it

6) extra boost controller thingy...450...i choose a avc-r instead cause of more features...also i heard the power fc boost controller solenoid is quite small.

7) yes now apexi are releasing a kit with hand controller due to consumer demand...u can still buy them seperate but works out cheaper when buying together...price look at no. 4

8) just buy one...they are an awsome unit

Power FC boost control kit is same as AVCR, just doesnt have the blue screen comp. Same solenoid, everything same as AVCR....why would they make a different boost control kit for their own ECU?? Gets me confused why ppl think its different. You use the hand controller instead of the blue sceen to monitor and set it up...

if you get an engineers cert for the turbo etc then everything is fine, but as far as i know with ECU it is illegal to have one that is tunable.. but im sure to get the eng cert you would have to pass emissions!

pretty hard to get defected for an ECU, they wont really pull out the kick panel and have a look in there and know the difference between stock and aftermarket!!

So, say I do replace the injectors and turbo...  

When I cop a defect, do the injectors and turbo have to go in order to swap the ECU in order to clear the defect?

:confused:

dont live ur life worrying about getting a defect.

If it happens it happens and you deal with it and then get it ceared and put everything back on again like the rest of of.

Can i get your opinions on this;

Because my car is auto, i decided to just grab an SITC and SAFC2. Now theyve been sitting her for awhile, because i dont plann to put them in and get tuned untill ive upgraded my turbo.

I know i have timing and fuel control with these. But im wondering weather its worth selling them, and buying a wolf3d even tho its going to cost me an extra $700 approx.

Im not aiming high, i want to make approx 230rwkw on a 2530 or hiflow turbo.

Im fairly confident the SAFC2 and SITC will do what i need

Can i get your opinions on this;

Because my car is auto, i decided to just grab an SITC and SAFC2. Now theyve been sitting her for awhile, because i dont plann to put them in and get tuned untill ive upgraded my turbo.

I know i have timing and fuel control with these. But im wondering weather its worth selling them, and buying a wolf3d even tho its going to cost me an extra $700 approx.

Im not aiming high, i want to make approx 230rwkw on a 2530 or hiflow turbo.

Im fairly confident the SAFC2 and SITC will do what i need

knore, I doubt you will make 230rwkw on stock injectors, in which case you'll need aftermarket injectors and an aftermarket ECU to control them, from what I've read the SAFC will freak with bigger injectors.

SAFC shouldn't give a stuff what size injectors you have - if the ECU can drive them, the SAFC can control them. All the SAFC does is modify the AFM signal so that the stock computer opens the injectors for a different amount of time. The flow rate of those injectors shouldn't matter.

SAFC shouldn't give a stuff what size injectors you have - if the ECU can drive them, the SAFC can control them. All the SAFC does is modify the AFM signal so that the stock computer opens the injectors for a different amount of time. The flow rate of those injectors shouldn't matter.
http://www.skylinesaustralia.com/forums/sh...73&postcount=50

http://www.skylinesaustralia.com/forums/sh...53&postcount=36

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...