Jump to content
SAU Community

Part numbers for restoring BCNR33 front wheel arch liners, brake ducts, and undertray

Super Roo

By Super Roo,
in General Maintenance

 Share

Recommended Posts

Super Roo Contributor

Super Roo

Posted
Posted

So, I'm looking to fix up under the front of my R33 GT-R (1995, not a v-spec or N1). Specifically after seeing the one they had in the Nissan Heritage Collection when I was there on holiday recently (awesome place by the way, if you're in Tokyo you have to go check it out) I want to put the front brake cooling ducts, engine undertray, and the front halves of the front wheel arch liners back in as mine came with none of these things when I bought it. I know there are some clearance issues on the wheel arch liners with 18s and the stock BOV, but I've got some solutions for that so I'm not too worried. What I was hoping for some help with is working out which part to get for the front of the right front wheel arch liner and the engine undertray, as there are two part numbers for each of these.

For the engine tray the numbers are 75890-05U20 and 75890-24U20. The first is the basic part, the second is listed as being for series one v-spec cars and the N1 in all years. I have actually found pictures of the two parts and the only discernible difference is an extra bulge on what I believe is the driver's side of the part. So my question is does anyone know what that bulge is for? Is it going to be useful to have that extra space down the track (for mods etc.) or is it some weird N1 specific thing that I'll never have a use for? I've attached the pictures.

For the wheel arch liners I haven't found any pics. The base part number is 63844-24U00, and the alternate part is 63844-24U10. It sounds like the second part was used for the v-spec and N1 in series one, and the N1 in series two. By series three all variants used the first part. Does anyone know what the difference is?

Thanks heaps to anyone taking the time to read and help, really appreciate all the knowledgeable helpful folks here.

N1 Tray.jpg

Basic Undertray.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Duncan
      New kid on the block

      By Duncan · Posted

      Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Songo
      New kid on the block

      By Songo · Posted

      Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • iain_ST44GA
      M35 VQ25DET starter motor

      By iain_ST44GA · Posted

      Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • Murray_Calavera
      R33 GTR running -9 with no tune

      By Murray_Calavera · Posted

      I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...