Jump to content
SAU Community

Overboosting...(RB25DET)

BASHERnissan
 Share

Recommended Posts

BASHERnissan Contributor

BASHERnissan

Posted
Posted

I figured out why my car was "misfiring"... my r33 gtst was playing up when any throttle or boost was applied, misfiring". So I hooked up my laptop to my link g4 ECU and ran a data log and found out on that log I had been boosting over 26psi !!!! it was tuned on 15psi and made 320hp to the wheels and one day started doing this weird fuel cut or ignition cut thing. SURELY this has something to do with it, but I cant find any fault codes or anything been thrown up when im hooked up to the ECU. The only thing is a couple time a RPM limit popped up but i was no where near the 7500 redline. ???? I have no clue with this tuning stuff so any ideas ?? I also blocked off my boost controller to the wastegate and still did the same thing as before but didnt run a data log to see what was up. I will attach the data log to this. (9:51 mins is where I boost spike the most)

 

Thanks for all your help.

Log 2019-06-1 2;08;29 pm.llg

Link to comment
https://www.sau.com.au/forums/topic/477251-overboostingrb25det/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      WGNC34 - floor mats

      By GTSBoy · Posted

      I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • MBS206
      R34 Skyline climate control unit transistor

      By MBS206 · Posted

      Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Murray_Calavera
      Tein Circuit Master- rebuild worth it?

      By Murray_Calavera · Posted

      Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • Duncan
      NC MX5

      By Duncan · Posted

      I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Duncan
      WGNC34 - floor mats

      By Duncan · Posted

      Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...