Jump to content
SAU Community

Recommended Posts

Very Rare Discontinued Racing Wheels from Yokohama Japan. These wheels don't need no introduction, with extremely limited number of sets available worldwide

. http://www.yokohamawheel.jp/brand/advan_tc2/index_jpn.html

Specifications: Yokohama Advan Racing TC II 18" 5x114.3 (JDM)

18 x 9.5 + 12 Rear

18 x 8.5 + 37 Fronts

 

Great lightweight forged for street and highly sought for track. The TE37’s don’t even come close to these in terms of quality and classiness. They are sleek and beautifully designed.

Tyres have about 6000kms and have not seen any track use

. Goodyear Eagle F1' 265/35/18 Rears Goodyear Eagle F1' 245/35/18 Fronts Wheels have been recently coated in NOVA and are self cleaning and very very easy to maintain. Price: $3400 with the Goodyears $2800 with no tyres. Courier can be organised at buyers expense.

No holds

Located in Melbourne

Uploaded photos are from some of my favourite collection of the wheels on a few race cars, including the design complexities of the structure

72989438_442836273014988_648861368199413760_n.jpg

64349704_192708551680909_8582476325455921152_n.jpg

71887846_666182107206450_6897958236062744576_n.jpg

72048625_550439852356867_1855817534234689536_n.jpg

72209014_402689780628916_2588751740497035264_n.jpg

72355009_598594517343681_6784196750098825216_n.jpg

72583430_1423333511148325_6561057672764850176_n.jpg

72993279_621418548389699_8916745950702075904_n.jpg

74693211_493270561257223_5532774701748715520_n.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok so after much research and talking with knowledgeable people I've got my turbo conversion done and it's all running great other than 1 small issue.  Car has remained auto with the na auto and tcm, I've used a stagea ecu with. NIstune board and everything is great other than my gear selection on the dash. It illuminates park, reverse, neutral, 3rd and 2nd. But nothing drive or what gear your in when you pop it into tiptronic.  I'm sure there is may e 1 wire in the ecu plug I need to move to rectify this. Dose anyone here have any ideas?   Cheers guys
    • Sorry I haven't been following all the detail, so you may have tried this. Does it idle with the tiniest bit of throttle you can add? You've mentioned the IACV, does it have an AAC valve and have you adjusted it at all (ie, screw the idle adjust screw all the way in, then back it out a couple of turns until idle is stable)?
    • My bad, I unplugged the one underlined in red instead of yellow before. With the car started, after unplugging the IACV (the one underlined in yellow), it idled at around 400/500 for 3 seconds before stalling. Attempting to start the car without the IACV will not start the car.   It does stutter and sputter for around 5 seconds before dying. However, immediately after starting it, you can already hear some slight sputters from the exhaust.   It won't start with the AFM unplugged. If it is when the car has already started, it stalls in a few seconds.   Yesterday, I did take some logs using Nistune of 3 scenarios. Car idling till it stalls Car idling and unplugging the IACV Car idling and removing the AFM I also have some previous logs of when the Car is idling till it stalls and when driving and it cuts. I am not really knowledgeable enough to understand what to look for. After every test, car idles rougher and rougher, until I have to stop. It will be fine the day after.
    • There is no difference between a 17x8 and an 18x8. The total diameter of the tyre needs to remain +/- the same (so you don't mess up the gearing, speedo reading, and clearance when turning front wheels..... so you just need to use a lower profile tyre on th 18 than you do on the 17. /rocket surgery.
    • I thought the same to start with. But then I thought it was one of those LCAs where the end of the ARB goes through a bushing in the LCA itself, instead of having an end link.
×
×
  • Create New...