Jump to content
SAU Community

Rims/ Wheel sizing on my ER34 25GT

ArcticsLeftGucci
 Share

Recommended Posts

ArcticsLeftGucci Apprentice

ArcticsLeftGucci

Posted
Posted

Hey,

My wheels I have currently on my car are 17 inches and I was looking at some nice 18 inch rims, I was just wondering if its alright to get 18 inch rims on a 17 inch stock car. (the car has stock suspensions) i know that it can throw off the speedometer but also wondering by how much it would be, is it alot?

DSC_0458.JPG

DSC_0459.JPG

Link to comment
https://www.sau.com.au/forums/topic/482651-rims-wheel-sizing-on-my-er34-25gt/
Share on other sites
GTSBoy Grand Master

GTSBoy

Posted
Posted
On 7/21/2021 at 8:32 AM, ArcticsLeftGucci said:

if its alright to get 18 inch rims on a 17 inch stock car

Of course it is. A 1" diameter increase on the wheel is a normal and trivial thing to do.

On 7/21/2021 at 8:32 AM, ArcticsLeftGucci said:

i know that it can throw off the speedometer

No it won't. The aim when you put bigger wheels on is to choose a tyre width and (lower) profile to keep the rolling diameter of the new wheel/tyre combo to within a few % of the existing rolling diameter. If you have a known speedo error now (say, you can tell it reads 4km/h fast at 100 km/h, checked by GPS speedo or something equally trustworthy) then you can often choose your new tyre sizing to get rid of some or all of that existing error. Not that you would make this your first priority, but it is an available input to your choices.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • tylink720
      "Cheap" bolt on turbo on RB25DET NEO

      By tylink720 · Posted

      @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • Kapr
      "Cheap" bolt on turbo on RB25DET NEO

      By Kapr · Posted

      You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
    • Watermouse
      "Cheap" bolt on turbo on RB25DET NEO

      By Watermouse · Posted

      https://www.facebook.com/share/19kSVAc4tc/?mibextid=wwXIfr
    • Kinkstaah
      Airbox for +T

      By Kinkstaah · Posted

      It would be well worth deciding where you want to go and what you care about. Reliability of everything in a 34 drops MASSIVELY above the 300kw mark. Keeping everything going great at beyond that value will cost ten times the $. Clutches become shit, gearboxes (and engines/bottom ends) become consumable, traction becomes crap. The good news is looking legalish/actually being legal is slighly under the 300kw mark. I would make the assumption you want to ditch the stock plenum too and want to go a front facing unit of some description due to the cross flow. Do the bends on a return flow hurt? Not really. A couple of bends do make a difference but not nearly as much in a forced induction situation. Add 1psi of boost to overcome it. Nobody has ever gone and done a track session monitoring IAT then done a different session on a different intercooler and monitored IAT to see the difference here. All of the benefits here are likely in the "My engine is a forged consumable that I drive once a year because it needs a rebuild every year which takes 9 months of the year to complete" territory. It would be well worth deciding where you want to go and what you care about with this car.
    • GTSBoy
      Airbox for +T

      By GTSBoy · Posted

      By "reverse flow", do you mean "return flow"? Being the IC having a return pipe back behind the bumper reo, or similar? If so... I am currently making ~250 rwkW on a Neo at ~17-18 psi. With a return flow. There's nothing to indicate that it is costing me a lot of power at this level, and I would be surprised if I could not push it harder. True, I have not measured pressure drop across it or IAT changes, but the car does not seem upset about it in any way. I won't be bothering to look into it unless it starts giving trouble or doesn't respond to boost increases when I next put it on the dyno. FWIW, it was tuned with the boost controller off, so achieving ~15-16 psi on the wastegate spring alone, and it is noticeably quicker with the boost controller on and yielding a couple of extra pounds. Hence why I think it is doing OK. So, no, I would not arbitrarily say that return flows are restrictive. Yes, they are certainly restrictive if you're aiming for higher power levels. But I also think that the happy place for a street car is <300 rwkW anyway, so I'm not going to be aiming for power levels that would require me to change the inlet pipework. My car looks very stock, even though everything is different. The turbo and inlet pipes all look stock and run in the stock locations, The airbox looks stock (apart from the inlet being opened up). The turbo looks stock, because it's in the stock location, is the stock housings and can't really be seen anyway. It makes enough power to be good to drive, but won't raise eyebrows if I ever f**k up enough for the cops to lift the bonnet.
×
×
  • Create New...