Jump to content
SAU Community

Transgo Shift kit RE5R05A (HD-2 - for a 370GT coupe *** Yes, I have read all the old posts***


Recommended Posts

Hi guys,

I have had a v35 for nearly 5 years and recently sold for a v36 coupe upgrade.

I have purchased the shift kit and am waiting for it's arrival.

My query is around finding a place/person in Melbourne to install for me.

All the old forums on this are 10yrs or so old so I don't want to msg those individuals who may not even like these cars anymore haha.

I have obviously called around some shops out west where I live but haven't gotten very far/they all want to see it and I'm struggling to even get a quote...

Thanks all,

Feel free to email me even if you know a place/have done it/can do it etc etc on [email protected]

Thank you for the replies gents, which shop is that Vee37? I have tried Hoppers Transmissions and Diffs and Techtrans to no avail. I'm hoping to find a shop that has maybe done it before.

Thanks for the reminder Paul, I'm tossing up between Matic J or S, but I am pretty sure from reading Matic S fluid is newer.

I have read a lot of US forums/g37 forums BUT I have seen old posts on here from like 2012 where guys in Melb were offering prices, hoping they'll reach out to me if they still do them.

On 8/28/2022 at 3:55 PM, Sammo V35 said:

Thank you for the replies gents, which shop is that Vee37? I have tried Hoppers Transmissions and Diffs and Techtrans to no avail. I'm hoping to find a shop that has maybe done it before.

Thanks for the reminder Paul, I'm tossing up between Matic J or S, but I am pretty sure from reading Matic S fluid is newer.

I have read a lot of US forums/g37 forums BUT I have seen old posts on here from like 2012 where guys in Melb were offering prices, hoping they'll reach out to me if they still do them.

I was ltalking about the previous post, referring to estimates in the US.

On 8/25/2022 at 5:48 PM, V35_Paul said:

on the US forums they say it takes a shop 4 hours.

ask their hourly rate.

Plus fluids too 👍 

 

On 8/28/2022 at 3:55 PM, Sammo V35 said:

I'm tossing up between Matic J or S, but I am pretty sure from reading Matic S fluid is newer.

Matic S is a lower viscosity fluid, if the manual specifies J, make sure it will happily run on the lower viscosity S before you use it.

  • Like 1

Sonicii - I have read on many forums that Matic S replaced J? Is this not true, I found a shop that can do it but they say in their quote they won't use nissan special oil (i,e matic S/J), do you know much about these trans and if that will be ok?

 

On 9/1/2022 at 2:55 PM, Sammo V35 said:

Sonicii - I have read on many forums that Matic S replaced J? Is this not true

Not exactly.  Matic S is a newer fluid.  Many Transmissions that specified J before S came out, can happily run on S, but they are not the same fluids (same with NS2/NS3 with Nissan FWD CVTs).  For example, my Infiniti specifies Matic S for the transmission, but Matic J for the transfer case as it requires a higher viscosity fluid.

Sorry, I don't know with any certainty if the RE5 can happily run on Matic S, plenty of forums and web pages say it can..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...