Jump to content
SAU Community

Recommended Posts

SmItleR, Paragon... you didn't answer his question.

The Greddy (Goo-red-ee :P) intake plenum is a fairly popular conversion in Japan. I wouldn't say that *everyone* considers it, for example, a 400ps ECR33 has the Greddy plenum, yet a 450ps HCR32 doesn't (stock intake)... go figure.

I guess it boils down to what the person wants to do with the car. The ECR33 has a better chance of 550+hp with the RB25DET, therefore you're more likely to see the Greddy plenum on RB25DET equiped cars. Well, lets just say 50% of the medium-hard tuned RB25DETs have the Greddy plenum (or similar), and less than that for the RB20DET in Japan. Going out on a limb there, but you get the idea...

Link to comment
https://www.sau.com.au/forums/topic/48478-greedy-plenums/#findComment-974958
Share on other sites

They do change these items but I'd say it would be the last thing to change if they do...plus they cost a fair bit. One would go for a larger throttle before doing the plenums.

Hell the Evo 4G63 plenums is great, demo cars are pushing out 600ps with them. We only touch the exhaust manifold side.

Link to comment
https://www.sau.com.au/forums/topic/48478-greedy-plenums/#findComment-975628
Share on other sites

Of the benefits available when fitting the Greddy unit to an RB25, additional power isnt really one of them.

On the more heavily modified cars particularly, as Rezz said they are common but I believe this is more for the fact they greatly simplify the intercooler pipework, removing the notorious U-bend and requiring a much shorter pipe between the cooler and the intake plenum itself

Link to comment
https://www.sau.com.au/forums/topic/48478-greedy-plenums/#findComment-975995
Share on other sites

thanks heaps guys. yea was looking for info as, with cams for the rb25 people have pick up on the common jap commbo so i am looking to do the same but with the greddy plenum so to speak. Its a part that doesnt gain on the dyno but could make a quicker car buy response and heat soak just interested to see if its popular or worth while on the jap scene.

What i can gather is it is but the mod takes place toward the end.

im realy aiming for 380rwhp but am coming across alot of small problems including a vacum leek that cant be found and looks like the plenum will come off and new gaskets and hoses installed. Loking at the price of these plenums they seem to have droped and i could get one for a 1000 or just under, so now would be the time but ive still got stock cams and exhaust manifold which seem to be done befor a plenum upgrade.

Link to comment
https://www.sau.com.au/forums/topic/48478-greedy-plenums/#findComment-976058
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
    • Yeah, shame. Maybe  driver's carpet is available 🙏. I am waiting for both amayama and nangun to confirm.
×
×
  • Create New...